No. He shipped the Chevelle.

Since it pains me to say that the car season is basically over for the year....The refining process will now continue over the fall and winter season.....Couple things I'm not comfortable with...… Ordered a new GM Ignition switch to hopefully solve the intermittent starting issue...… #2... I'm going to bite the Bullet and change out the Concept 1 Front drive set-up(single belt for everything) for a Wegner LSA front drive ( two belt drive) ……. In the 57 the single belt C1 set-up moves everything forward to align with the Blower Belt position...… In this position everything fits, But.…..There is no clearance between the drive and the fans and radiator...… So, in driving the car like we do across the country, if anything would happen to fail …….. the only way to access the components is to basically remove the radiator and or Core support (another reason I was hesitant to take the Nomad on the Road Tour this year)...… Don't want to be in that position..... With the Wegner set-up, there will be another 1 1/2" of room to at least have room to access the Pulley's Etc... One of these things you learn as the process moves along..... Gonna make it more Gooder !!!..... LOL


http://i13.photobucket.com/albums/a2...BB7C949FB9.jpg

http://i13.photobucket.com/albums/a2...9BEE71AB2B.jpg

Good choices Ken!!

Red and Grey primer go well together - so we can get some good photos!! LOL

Anything that makes it easier to repair on the road is the way to go. Wegner make a good looking system too.

hooly chit....................that's tight!

After buying the Glide Engineering seat 2 1/2 years ago...…. It's been a struggle trying to get the foam and covers made to have a comfortable decent looking seat...…. After being in three different shops and finally getting a decent job in the third shop, then finding out the seat was too wide and didn't fit...… I've had it with that seat..... Glide made new seat back frames so the seat would now fit, but, after being on the Road Tour a couple weeks ago and talking to Greg Weld and sitting in Bret Vogel's car...… I have decided to sent the original seat to Tracy Weaver in Nebraska and get him to recontour and work his magic on it as he has done many of these conversions………. Here are some pictures of the seat after receiving it from upholsterer #2 …….What a waste of time and her money !!!

http://i13.photobucket.com/albums/a2...813D6467_1.jpg

http://i13.photobucket.com/albums/a2...7D540313A2.jpg

http://i13.photobucket.com/albums/a2...BB1544222C.jpg

http://i13.photobucket.com/albums/a2...B250569987.jpg


http://i13.photobucket.com/albums/a2...0C3873984E.jpg

What a shame. Tracy does some amazing work.

Awesome that Greg referred you to someone who will finally get you what you've been asking for all along :)

"And" paid for !!!! At this point it is close to being the most expensive seat in the world.......LOL

I have installed a couple of Ciadella Nomad interiors. The quality seems pretty good.

Don