Last March we had all schools shut down for Covid and were doing remote learning. I was up at 6am setting out the assignments for the students and checked my E-mails every 2 hours. The rest of the time I was basically bored. When I get bored stuff is going to happen, and quickly!
https://lateral-g.net/forums/attachm...1&d=1627689099

This is the self-isolation of 2020. I need to not go bananas so I end up working even harder than normal. The drivetrain in that service truck will be coming out in the next few days.
https://lateral-g.net/forums/attachm...1&d=1627949733

Getting the motor ready to leave the chassis is a big deal. There are so many wires that I actually have to worry about not screwing up. Any mechanics that are on here are aware of “special” bolts that the manufacturers use just to piss you off. There are a few of them here and I will make note of them. Some engineers need a punch in their ugly faces!
https://lateral-g.net/forums/attachm...1&d=1628258568

We hit a milestone with that last post. That would be my 100th post. Now if you actually counted them it may not work out exactly as some posts are actually broke down into two or three because of posting limits for pictures.
What this means is that I worked 100 days on the car. Some were 10-12 hours, and some were only a few hours, but those were the days that I put in. This just gives you a guideline as to the amount of work you need to put in to build a car from scratch.
There are a lot of days that you are building something that is just to help you work on the car, most of those I documented. There are also lots of days where you are just running around picking stuff up and I kept no record of those days. Intellectual time also resulted in no record, but many days of pondering.
Let’s just for arguments sake say that those were 8 hour days. We are at 800 hours of labor. Even with a 50$ an hour shop rate we are at $40,000 in labor charges. We probably have at least that much more to go.
When you see a car that’s been shop built and done with an open check-book most of us would faint at the cost the owner paid to have that car done. OH and try and find a $50 shop rate. I am terrified of the costs of paint and body when we get there!
I post this not as a discouragement, but for the readers and the dreamers to realize that this stuff isn’t for the faint of heart. I also do it so all these cars are appreciated. Sometimes I need to learn that myself as I am a bit of a snob.
This is a labor of love and while I work on this car my mind wanders to what I am going to work on next? No sense in just getting a restful night’s sleep, when you can have the grey matter running all night.
HMMM, a plane made from carbon fiber would be ultra-cool……………………………

Started the day with no intentions of removing this motor. Things just started rolling and here we are!
https://lateral-g.net/forums/attachm...1&d=1628531363

Borrowed my neighbor’s trailer and hauled the core off to the car wash. It’s easier to lose skin that doesn’t get infected. Clean prevents gangrene, REMEMBER that kids!
https://lateral-g.net/forums/attachm...1&d=1628735089

The motor had to be able to go in from the top. It goes in pretty easy with all belts and attachments. Ultimately though we may have to remove the upper intake in the future for clearance.
https://lateral-g.net/forums/attachm...1&d=1629163845