What John said. Nice site.:thumbsup:

hey Roger I Saw the frames but no truck or you at delmar

The sure look good tho

http://i805.photobucket.com/albums/y...1/DSC_0450.jpg

Oh, and the sweet lookin table:yes:

Thanks for the compliment on the frames. I was around the booth almost all weekend, But I do remember going to the restroom when Bob Ryder from Truckin magazine stopped by.

The weather sure was beautiful this past weekend.

Roger,

It was good meeting you and sweet looking frames!

Update time. Well we have been super busy here at the shop. Chassis stuff is really taking off. We have done a bunch of work to the chevelle frames to get raise the bar even further. The idea can from our good buddy Kenny Davis. Not on prurpose, of course. But we have a way to build a frame from an idea he had that we are able to design a frame that is much strong and will not hang down below the pitch weld. So our frame was all ready the tight fitting frame in the industry, but now it will not be visible below the rocker. That has been a big Concern from the customers we are working with. Here is picture of the chassis we developed to fit the customers wagon.

It sits really good on 18's and 20's. This is ride height on coilovers. 4.5' of ground clearance.
http://i616.photobucket.com/albums/t...ril2011007.jpg
http://i616.photobucket.com/albums/t...ril2011006.jpg

We took in this project from a customer. It should be a full tilt cruiser next year some time. More details in the next few weeks. It will be bad. This was a 64k low mileage stocker we drove home. I have not found any rust yet.
http://i616.photobucket.com/albums/t...rch2011065.jpg

We have done a bunch of design work to set our tri-5 frames to give a bit more dish and be able to lower the more. So we here where we are at with the Cognito project. The customer wanted dish on the front wheels and a slammed stance. It is hard with the vette arms because they a so long. This car sits 4.25 from the ground with nothing below the rails.

It looks good. 18's and 20's
http://i616.photobucket.com/albums/t...ril2011013.jpg
http://i616.photobucket.com/albums/t...ril2011011.jpg

You will also see some of the secret progress we have had on Dave's camaro. It is coming along nicely. :D :D

Dude.... take some photos from your knees. I get tired of just seeing roofs.

Well Ironworks is going to take a basic stocker car and transform it into Basic Saturday night cruiser. It will have the 480 Hp Ls engine with 5 speed trans. Custom tires and wheels. Basic brakes. Just our entry level chassis to throw together. We are getting the body swapped now.

http://i616.photobucket.com/albums/t...rch2011049.jpg

I will create a thread as we get further along.

I'm just showing you the angle you never see.

He is shot with my Greg lense.

http://i616.photobucket.com/albums/t...ril2011002.jpg
http://i616.photobucket.com/albums/t...ril2011001.jpg