seats should be done next week and then its time to break it in
http://i30.photobucket.com/albums/c3...65533127_n.jpg
http://i30.photobucket.com/albums/c3...82816445_n.jpg
http://i30.photobucket.com/albums/c3...28233391_n.jpg
http://i30.photobucket.com/albums/c3...96225921_n.jpg
http://i30.photobucket.com/albums/c3...23191857_n.jpg

check out those light bulbs
 

i noticed whenever i was working on my car those little courtesy lights can get hot. Little did i know they were burning the sockets. I this on my under dash lights and my doom light so i replaced them with LEDS.

http://i30.photobucket.com/albums/c3...1051736378.jpg

went with these for the doom light
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

and i went with these for the under dash lights. There is already a hole in the dash where your vent handles would come out of. I opened those holes up to fit these lights in there and now the lights are brighter and less heat.
https://www.superbrightleds.com/more...ed-light/1494/


Also anyone else have their rear diff make some noise at lower speeds? I heard a few cars make this clicking noise running the true trac diff.

video coming shortly

if you want to rekey your ignition to match all of your other locks follow these instructions.There's a metal clip inside the cylinder, pop the cover off and you will see 6 springs, take the springs out then you have 6 y shaped clips with diff height notches in them. Take them out and like the notches back up with the new key using a blank lock, take the y clips back out remembering what order in the cylinder and reinstall the springs and cover and your done. Now i have 1 key for my glove box, door locks, trunk and to start my car.

Another option, the new lock "kits" come with all the locks, gaskets, retainers AND are all keyed alike!

I enjoy re-keying, I learned it from my father, but in the case, especially if a few could use replace, the new set makes sense and is not very expensive.

Matt

WOW! The car looks absolutely beautiful!! Great choice of color/wheels/stance/Interior...... I'm sure you are stoked to get on the road!

https://m.facebook.com/video_redirec...=like&__tn__=F

https://m.facebook.com/video_redirec...=like&__tn__=F

Any more updates?

I saw the car at Goodguys show at TMS on Oct 1st.

http://www.rodscarcraft.com/customer...o/DSC09774.JPG

http://www.rodscarcraft.com/customer...o/DSC09775.JPG

http://www.rodscarcraft.com/customer...o/DSC09779.JPG

http://www.rodscarcraft.com/customer...o/DSC09780.JPG

Thanks for the pictures, the car came out beautiful!! Well done.

ride height almost perfect for my liking. Front end bounce alittle so eventually ill upgrade the front coil overs as well
http://i30.photobucket.com/albums/c3...9/stance_1.jpg

After goodguys i decided to change this up.
http://i30.photobucket.com/albums/c3...d19/before.jpg

Started by making coil pack boxes and placing the coil packs on the subframe. They are stacked two high. Wires are ran behind the headers and between the engine mounts and subframe.
http://i30.photobucket.com/albums/c3...il%20packs.jpg

Which lead to this look
http://i30.photobucket.com/albums/c3.../after%201.jpg

After searching my ass off for some 19156430 valve covers that are discontinued i found a set at a dealership in houston. SO now I'm here. Trying to decide to leave it alone or paint the letters to color match my car. Thoughts?
http://i30.photobucket.com/albums/c3...ve%20cover.jpg