I just saw a size I didnt know existed. Its a 405/25R24 made by Perelli. It was on a truck, and it looked purty!!!!

Yeah, those are sweet. They made those for the dually guys. Wheel companies are now making one solid, single wheel for the rear on duallys that is extra wide which accomodates and replaces what used to be the two wheels in the back for the 405 width. But, I guess if a guy wanted to tub his car or 1/2 ton truck and shorten his rear end it could go on anything.

We wanted that tire too. The best we have found is the 295-45/20 from BFG.

What happened to all the 335-345s that were all over the place 4-5 years ago?

Oh, BTW there a bunch of 305/35R20s as well as 315/35R20s and a couple of 325s too. Found some 335/30R20s as well. And I answered my own question and found some 345/30R20s also

We should probably take this to another thread so we don't muck up Bills post. In the meantime, one quick reply. I am currently running a 295/40/20 BFG KDW on a 9.5" rim. If my calculations were correct, a 315/40/20 on an 11" rim would fit with out tubbing. Unfortunately this combo is my Unicorn and doesn't exist.

I'll probably run the 295 on a 10 or I hear a 10.5 is in the works.

I know your pain. I've never been happy looking for tires in the sizes I want. The closest you're probably going to find is another 295/40 or a 315/35, unless you can find some lefter 315/40's that a shop has in stock still. You can always cross your fingers and hunt eBay and Craigslist.

hey guys havent logged on for a while sorry for not answering your questions ive been working on a new project and set the truck aside for a little. ican see the tire questions have been answered. my wheel offset is 6 out on the back and 4 out on the front but i dont think they will fly on a stock set up. if you need any spec measurements pm me an ill give you my #. ill be back to working on the truck as soon as my camaro is done. thanks bill

well i took a little time off of the truck to build myself a ls powered 69 camaro, now its done and i cant wait to finish this truck. i have to make some inner fender liners and im going to make a new dash out of metal. after those couple fab items im going to take the whole truck apart and paint it red to match my camaro.(the black looks cool but its a royal pain to keep clean) i have put about 700 miles on the truck and have worked a lot of little bugs out. thanks for checking in. bill

Lets see some picks of the Camaro Bill!