I am still at it. Seems like every time, I think I am done with metal work, I see something else that needs completed.

Waiting on a Trans tunnel metal to be bent, and that should finish up every thing.

Time though is not always a friend.

Thanks for looking.

Bill

A little more work on Saturday. Garage time is always the best.
Got both trunk hinge supports welded back in. The trunk area seems to be complete. Trying to decide if I’m going to leave the jack and spare tire mounts on the floor.
Still waiting on metal for the trans tunnel. Hopefully it will be ready next week. Attachment 83332
Attachment 83333
Also finally made a couple of clamps for the weld table.
Attachment 83334
Attachment 83335


Sent from my iPhone using Tapatalk

70 Chevelle - My First Car
 

So a little more garage update. Got a new TIG machine but needed a place to put it. So now the plasma and TIG are on a tool box I already had. It needed all swivel castors on it and a way to hold a gas bottle. I made a frame out of 1” square tubing and got it all put together. Attachment 83466


Sent from my iPhone using Tapatalk

70 Chevelle - My First Car
 

Back to the Chevelle.
Searched for brake information in the brakes section of Lateral-g. Received some very good information about a company called BigBrakeUpgrade.
They were very helpful in getting information to me and walking me through the process of modifying Camaro brake backing plates to fit a 12-bolt GM rearend.


Sent from my iPhone using TapatalkAttachment 83475
Attachment 83476
Attachment 83477
Attachment 83478
Attachment 83479

Got the axles back from the machine shop and set up to drill and tap for new 12” studs. Made a block to ensure that the drill and tap went in straight. Attachment 83560


Sent from my iPhone using Tapatalk

Got the backing plates installed and the axles in. Mounted the rotors and the new calipers. Attachment 83561


Sent from my iPhone using Tapatalk

Also got the new exhaust manifolds and installed on the engine. Tried to put the picture in, but Tapatalk seems to not like to do that.


Sent from my iPhone using Tapatalk

Adding other pictures.
Tapping the axles
Attachment 83565

Pictures of the rotors and calipers installed.

Moving forward to the front brakes. The previous brackets will not work with the new calipers. Contacted BIGBRAKEUPGRADE.COM and the correct brackets will be here this week.