Another shot of the contraption. This is the actual panel, to enclose the filter element from engine bay hot air...

Another view. This the panel installed. You can see the 4" hole in the floor of the inner fender in this pic...

Here's another shot to show clearance between the tubing, and the electric fans on the radiator shroud...

A picture of the scoop thingy I made to seal off the fresh air hole, from tire debris and/or water. Can you guess what I made this from?

I made another close-out panel for the other side of the engine bay, where the battery would normally go, and mounted a catch can there. The can has a drain valve on the bottom of it, which is accessed from the bottom of the car...

Another shot of this setup. Truck accessories are on the car for now, but I'm hoping to upgrade in January to a nicer looking, much more functional setup. I'd REALLY like to just drive this thing first...

These came in the big brown truck a while back...

Polished my wheels, and had a friend of mine mount and balance them. Not too shabby...

Put some of these on. Single adjustable RideTech's. Who is this Ron Sutton guy!?

Changed out my front upper and lower control arms, for some better geometry, and Delrin bushings. These are nice!!!