Lateral-g Forums - 1970 Camaro-Purpose Built Auto Cross

Page 26 of 28

« First

Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)

- - 1970 Camaro-Purpose Built Auto Cross (https://www.lateral-g.net/forums/showthread.php?t=44153)

Mac&Otto

09-01-2015 04:34 PM

Quote:

Originally Posted by Vince@MSperfab (Post 615496)

If you are planning to build your cage to pass tech, check the rules first.

1.750 .120 wall tubing is usually the norm in a rule book. Using ChroMo will be pointless as it will not offer a weight savings.

Thank you sir.

Mac&Otto

07-23-2016 01:41 PM

Back At It!!!

1 Attachment(s)

I'm pretty sure I will make this the longest build ever!!! But, I've managed to get some time in on the car and it always gives you a momentum boost when you see progress. I've spent many hours fine tuning the Ultimate Products fiberglass just so I can bolt pieces down and open and close doors!!! It's not terrible but it's been fairly labor intensive getting things to fit. Never the less, I've made progress and hope to push on.

Mac&Otto

07-23-2016 01:43 PM

1 Attachment(s)

Body lines aren't bad!!!

Mac&Otto

07-23-2016 01:44 PM

1 Attachment(s)

Hood looks like it will fit with some massaging as well.

glassman

07-23-2016 04:46 PM

Nice to see you back at it!!! Looking good!!

Mac&Otto

07-24-2016 06:06 PM

Quote:

Originally Posted by glassman (Post 641850)

Nice to see you back at it!!! Looking good!!

Thank you sir!!!!

WSSix

07-24-2016 06:09 PM

x2 glad to know you're still making progress slow or not. I really dig this build. Good luck with it!

Mac&Otto

07-25-2016 10:03 AM

Quote:

Originally Posted by WSSix (Post 641914)

x2 glad to know you're still making progress slow or not. I really dig this build. Good luck with it!

Thanks. I hate to make a plan on when I'll be ready for paint but hopefully I will keep plugging away and have it painted before October. We will see.

Thanks again, Cal

Sandro's 1969 502 Camaro

11-24-2016 11:09 AM

Raised floor panels.

Hi, im in the process of raising my floor pans, for exhaust clearance. Just wondering if you used 20 gauge or 18 gauge metal?

Thanks, Sandro

Mac&Otto

11-25-2016 01:04 PM

Quote:

Originally Posted by Sandro's 1969 502 Camaro (Post 649342)

Hi, im in the process of raising my floor pans, for exhaust clearance. Just wondering if you used 20 gauge or 18 gauge metal?

Thanks, Sandro

I used both. It has some 18 gauge bracing and flanging but the actual beaded pan is 20 gauge. Plenty solid.

Cal

All times are GMT -7. The time now is 11:52 AM.

Page 26 of 28

« First

Show 40 post(s) from this thread on one page