Lateral-g Forums - 5 Years Later - It's Not a "new" Project, And Not a New Member Anymore!!!

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)

- - 5 Years Later - It's Not a "new" Project, And Not a New Member Anymore!!! (https://www.lateral-g.net/forums/showthread.php?t=1180)

SUPER ROD Magazine........

Marty,

I just saw your Muscle Truck in SUPER ROD Magazine!!!!!!! Way to go!

--Eric

Quote:

Originally Posted by HWY Nova (Post 159250)

Marty,

I just saw your Muscle Truck in SUPER ROD Magazine!!!!!!! Way to go!

--Eric

What issue ???

Marty
you need 20-30 wastegates on your motor???????????

:willy: :bow:

Tonny

September Issue:
http://i338.photobucket.com/albums/n...ynova/MINI.jpg

I HAD NOTHING TO DO WITH THE TITLE!!!!!!!!!!!!!

--Eric

Sure you didn't

Quote:

Originally Posted by HWY Nova (Post 159321)

I HAD NOTHING TO DO WITH THE TITLE!!!!!!!!!!!!!

--Eric

That is one bad mini! Congrats Marty!

:D

Cool to see Shroeder's chassis get some coverage as well. :cool:

thanks guy's

but sooner or later Kenny needs to get some credit for my truck.

it's Kenny Davis Hot Rods not kennys rod shop in Idaho

www.kdhotrods.com

Maybe (just maybe) SUPER ROD will print a retraction.......

Don't they know nuthin'? It's a Muscle Truck!

--Eric

Quote:

Originally Posted by syborg tt (Post 159326)

thanks guy's

but sooner or later Kenny needs to get some credit for my truck.

it's Kenny Davis Hot Rods not kennys rod shop in Idaho

www.kdhotrods.com

Not Kenny Haden?

Quote:

Not Kenny Haden?

No... That would be Tim Haden's brother! HA!

--Eric

Quote:

Originally Posted by HWY Nova (Post 159331)

No... That would be Tim Haden's brother! HA!

--Eric

:lol:

Marty,

You are correct: Kenny and his crew are doing an awesome job! Soon you'll be thanking Tracy for your interior...... and then it should be DONE!

I'm jealous..... I'm only six weeks into my project.....

--Eric

Quote:

Originally Posted by HWY Nova (Post 159336)

yep, they are a great group of guys.

6 weeks - wow just wait it's a blast

Quote:

Originally Posted by syborg tt (Post 159368)

yep, they are a great group of guys.

6 weeks - wow just wait it's a blast

you gonna have it at the chicagoland goodguys?

Quote:

Originally Posted by Young Gun (Post 159433)

you gonna have it at the chicagoland goodguys?

i will anwser that , NO . but he WILL have the brown 57 .

So does this Kenny Davis guy do monster notches, fast bags and body drops. Cuz your mini truck is SIC BRAW.

I'm looking to get a walk through with a dancing bed on my triple axle B2000.

Looking good boys, I wonder who will finish first. I have pretty SIC sport truck coming togther myself.

Good Afternoon All,

Kenny Has been cranking on the truck.
In order to put the chassis together he needed to get a list of Hardware together.

Once it was together we put an order in with Totally Stainless.

Lets just say "Doc" is awesome to work with.
He took my list and pulled it all together in one day.

You say no big Deal - well check out the list at the bottom of this post.
It's 963pcs total and there are still plenty more to order.

http://www.syborgtwinturbo.com/album..._Stainless.gif

This is just the hardware for the chassis.

http://www.syborgtwinturbo.com/album...07_26_KD_0.jpg

All of the hardware come bagged & tagged.
All Kenny has to do is look for the bag that states the area he's working
and he's off to the races.

http://www.syborgtwinturbo.com/album...07_27_KD_0.jpg

Just another close up of the parts.

http://www.syborgtwinturbo.com/album...07_27_KD_1.jpg

Kenny & Travis putting it all together.

http://www.syborgtwinturbo.com/album...07_29_KD_0.jpg

It's starting to look like something.

http://www.syborgtwinturbo.com/album...07_29_KD_1.jpg

As promised here is the hardware list - WOW !!

Bolt & Washer S-10 Steering Box
1 pcs --- 12mm Clevis Washer - 25mm OD - 3mm Thick - 0.473in ID - .984in oD - .118 THK
1 pcs --- 7/16-14 x 4.18 small Hex Head - Large Flange - High Strength

Upper Ball Joints
8 pcs --- 1/4-20 x 1 Twelve Point - Large Flange - .56in - High Strength
8 pcs --- 1/4 AN Flat Washer - .50in OD - 18-8 SS 6mm Flat Washer

Upper Control Arm
4 pcs --- 1/2-20 x 3 Hex Flange Head - 17-4 PH High Strength
4 pcs --- 1/2-20 Tall Nut - 304 SS - 70,000 Yeild Strength
4 pcs --- 1/2 Split Lock - 18-8 SS
4 pcs --- MS 818 Flat Washer - 1.06in OD - 18-8 SS

Pivot Shaft
4 pcs --- 5/8-18 Nylon Locking Nut - 18-8 SS
4 pcs --- 5/8 x 1 3/4 Body Mount Washer - 1.81 OD - 18-8 SS

Lower Control Arms: ( Drill out 12mm Bushings to 1/2" )
2 pcs --- 1/2-13 x 4 Flanged Hex Head - 17-4 PH High Strength
2 pcs --- 1/2-13 Nylon Locking Nut - 18-8 SS

2 pcs --- 9/16-12 x 4 3/4 hex Flange Head - 17-4 PH High Strength
2 pcs --- 9/16-12 Nylon Locking Nut - 18-8 SS

Idler Arm
4 pcs --- 7/16-14 x 1 Twelve Point - Large Flange - High Strength
4 pcs --- 7/16 AN Flat Washer - .75" OD - 18-8 SS

Caliper Bolts
10 pcs --- 7/16-20 x 2 Twelve Point - Small Flange High Strength
10 pcs --- 7/16 AN Flat Washer - .75in OD - 18-8 SS

Caliper Brackets
opps we ordered the wrong size
8 pcs --- 3/8-24 x 1 Twelve Point - High Strength
4 pcs --- 3/8-24 x 1 1/2 Twelve Point Flange Head High Strength
4 pcs --- 3/8-24 x 2 Twelve Point - High Strength
16 pcs --- 3/8 AN Flat Washer - .63in OD - 18-8 SS 10mm Flat Washer - 16.0 mm OD

Rotor to Hats
32 pcs --- 5/16-18 x 1 Twelve Point - Large Flange - .63in - High Strength
32 pcs --- 8mm Standard Flat Washer - 15.7mm OD 5/16 Flat Washer - .62 OD - Din 125 A2

Four Link & Panhard Bar
10 pcs --- 5/8-11 x 3 Flanged Hex Head - 17-4 PH - High Stength
10 pcs --- 5/8-11 Nylon Locking Nut - 18-8 SS
20 pcs --- 16mm Standard Flat Washer - 29.7mm OD 5/8 Flat Washer

Front Sway Bar
4 pcs --- 3/8-16 x 1 1/4 twelve Point - Large Flange - .63in - High Strength
4 pcs --- 3/8 AN Flat Washer - .63in OD - 18-8 SS 10mm Flat Washer - 16.0 MM OD

Sway Bar Mount
4 pcs --- 1/4-28 x 1 Twelve Point - High Strength
8 pcs --- 1/4 AN Flat Washer - .50in OD - 18-8 SS 6mm Flat Washer - 12.7mm OD
4 pcs --- 1/4-28 Twelve Point Nut - High Strength

Rear Sway Bar
4 pcs --- 3/8-24 x 1 1/4 Twelve Point Flange Head High Strength
8 pcs --- 3/8 AN Flat Washer - .63in OD - 18-8 SS 10mm Flat Washer - 16.0mm OD
4 pcs --- 3/8-24 Twelve Point Nut - High Strength

Front Air Bag
4 pcs --- 3/8-24 x 1 1/2 Twelve Point Flange Head High Strength
8 pcs --- 3/8 AN Flat Washer - .63in OD - 18-8 SS 10mm Flat Washer - 16.0mm OD
4 pcs --- 3/8-24 Twelve Point Nut - High Strength

Rear Air Bag
4 pcs --- 1/2-13 x 2 1/4in Hex Flange Head - High Strength - 17-4 PH
8 pcs --- 1/2 AN Flat Washer - .875in OD - 18-8 SS 12mm Flat Washer: 22.2mm OD
4 pcs --- 1/2-13 Nylon Locking Nut - 18-8 SS

Transmission Mount
4 pcs --- 3/8-24 x 1 1/2 Six Point (Small Hex Flanged Head) High Strength
4 pcs --- 3/8-24 Twelve Point Nut - High Strength
8 pcs --- MS 813 Flat Washer - .875in OD - 18-8 SS

Fuel Cell, Air Tank & Roll Bar
30 pcs --- 3/8-16 x 1 Twelve Point - Large Flange - .63in - High Strength
30 pcs --- 3/8 AN Flat Washer - .63in OD - 18-8 SS 10mm Flat Washer - 16.0mm OD

Intercooler to Frame
4 pcs --- 5/16-24 x 1 1/4 Six Point (Small Hex Flange Head) High Strength
4 pcs --- 5/16-24 Twelve Point Nut High Strength
8 pcs --- 8mm Standard Flat Washer

Fuel Pump, Cooler Lines & Ground Studs
16 pcs --- 1/4-20 Serrated Flange Nut 18-8 SS
16 pcs --- MS 809 Flat Washer - .56in OD 6mm Flat Washer - 14.2mm OD - 18-8 SS

Fuel Pump Ground Stud
1 pcs --- 3/8-16 Serrated Flange Nut - 18-8 SS
1 pcs --- 10mm (0.394 ID) Clevis Washer, 20.5mm (.812) OD, 2.5mm 12 GA. Thick DIN #1440-A2

Dust Sheild
6 pcs --- 3/8-16 x 1 1/4 Twelve Point - Large Flange - .63in - High Strength
6 pcs --- 3/8 AN Flat Washer - .63in OD - 18-8 SS 10mm Flat Washer - 16.0mm OD
1 pcs --- Bellhousing Kit - General Motors Vehicles - Automatic Transmission or Aluminum Bellhousing - 1 1/2" High Strength - Small Hex Head

Transmission Pan
20 pcs --- 5/16-18 x 1 Twelve Point - Large Flange - .63in - High Strength
20 pcs --- 8mm Standard Flat Washer - 15.7mm OD 5/16 Flat Washer - .62in OD - DIN 125 A2

Inner Fender
30 pcs --- 1/4-20 x 1/2 Twelve Point - Large Flange High Strength
pcs --- missing washer -- Forgot to Order

Misc Bolts
2 pcs --- 6-1.0 x 25mm 12 Point - High Strength
2 pcs --- 8-1.25mm x 25mm 12 Point - High Strength

20 pcs --- 3/8-24 x 1 Twelve Point - High Strength
28 pcs --- 3/8-24 x 1 1/4 Twelve Point - High Strength
6 pcs --- 3/8-24 x 1 1/2 Twelve Point - High Strength
50 pcs --- 3/8-24 Twelve Point Nut - High Strength
100 pcs --- 3/8 AN Flat Washer - .63in OD - 18-8 SS 10mm Flat Washer - 16.0mm OD

100 pcs --- MS813 Flat Washer 0 .875in OD - 18-8 SS
20 pcs --- 5/16-24 x 1 Twelve Point - Large Flange - .63in - High Strength
20 pcs --- 5/16-24 Twelve Point Nut High Strength
40 pcs --- 8mm Standard Flat Washer - 15.7mm OD 5-16 Flat Washer - .63in OD - DIN 125 A2

20 pcs --- 1/4-28 x 1 Twelve Point - High Strength
20 pcs --- 1/4-28 twelve Point Nut - High Strength
40 pcs --- 1/4 AN Flat Washer - .50in OD - 18-8 SS 6mm Flat Washer - 12.7mm OD

Its looking good Marty, not long now!

DUDE
when is the mini truck going to be finished????

i am starting to think you are just waiting till you get 2000 posts and then your going to tell us it's done

KENNY hurry up man!!!! this is getting painfull

:thumbsup:

i like rogers idea of the walk through!!! DOIT

Kenny... do you really want that "mini truck" crowd calling you all the time ? :lol:

Quote:

Originally Posted by kennyd (Post 161191)

and another f$%kin magazine without my name on this truck

Hey at least this one has your Name however it's not your shop. So we are getting closer.

Quote:

Originally Posted by HRBS (Post 161194)

Kenny... do you really want that "mini truck" crowd calling you all the time ? :lol:

I think i am going to post his phone and e-mail address on the s10 boards

Quote:

Originally Posted by syborg tt (Post 161199)

I think i am going to post his phone and e-mail address on the s10 boards

WHEE!

Yeah I saw that Kenny's rod shop thing.... but did not want to point that out? Sorry KD, I know who has Marty's truck. Oh yeah Marty... way to call me back the other day. Slacker!

Carter

Quote:

Originally Posted by CarterHickmanDesigns (Post 161481)

Yeah I saw that Kenny's rod shop thing.... but did not want to point that out? Sorry KD, I know who has Marty's truck. Oh yeah Marty... way to call me back the other day. Slacker!

Carter

lol - I called you back just didn't leave a message

Good Morning All,

Just a quick little update.

This post is a little out of order -- sorry about that.

Prior to putting the chassis together it was important that we get the right parts for the chassis.

Quick call to Art Morrison and we ordered up some 5/8” x ¾” Stainless Poly Rod End.

http://www.syborgtwinturbo.com/album...07_22_KD_1.jpg

Okay getting ready to put the motor in the chassis.
However Kenny had a few complaints.

http://www.syborgtwinturbo.com/album...07_22_KD_0.jpg

Seems the Red Poly Motor Mounts were unacceptable and a Quick call to Summit Racing solved that problem.

Time to order new Black Poly Motor Mounts

http://www.syborgtwinturbo.com/album...ns_3_1114g.jpg

Let's not forget the Tranny Mount.

http://www.syborgtwinturbo.com/album...ns_3_1108g.jpg

What the heck lets order some more ARP Stainless Steel Bolts
from Totally Stainless.

http://www.syborgtwinturbo.com/album...p_430_3102.jpg

http://www.syborgtwinturbo.com/album...430_3105_w.jpg

Finally the motor is in the chassis

http://www.syborgtwinturbo.com/album...08_06_KD_0.jpg

Progress is a beautiful thing!! Looking great Marty!!

marty

:thumbsup: going together .....:woot:

i cant wait to see it rolling at ride height, out in the sun ,showing of that paint job

more pics...more pics

radrambler

Sweet looking truck :thumbsup:

Good Morning All,

The Guys are busy working on the truck
They brushed all of the stainless steel exhaust tubing we got from
the Rod Builder Kit from "Stainless Works".

http://www.syborgtwinturbo.com/album...08_11_KD_0.jpg

One of my new Favorite Pictures

http://www.syborgtwinturbo.com/album...08_11_KD_1.jpg

That really nice Polished Billet Specialties Steering Column has now been painted black.
You can also see that the pedals are hung as well as the Vintage Air, MSD & Big Stuff 3

http://www.syborgtwinturbo.com/album...08_11_KD_2.jpg

Hard to tell from the Picture but the shifter is in with the new Shifter Cable from
George Blake @ Prime Gears

http://www.syborgtwinturbo.com/album...08_11_KD_3.jpg

Plenty more to come in the next couple weeks with Sema getting closer.

Looks like a good beer cooler hauler....

Looking great Marty! What booth will it be in at SEMA?

marty

:thumbsup: progress....does that mean we get more update pics every week?

radrambler

THAT IS SICK!!!
Awesome build.:hail:

Good Afternoon All,

I figured I would share some pictures of the truck.
It's almost starting to look like a truck again.

http://www.syborgtwinturbo.com/album..._26_Josh_7.jpg

I can't tell you how excited I am with the progress of the truck.
It's really beating my expectations.

http://www.syborgtwinturbo.com/album..._26_Josh_9.jpg

In case you didn't notice the pictures are really good.
I want to thank Josh taking these incredible pictures.

http://www.syborgtwinturbo.com/album...26_Josh_10.jpg

http://www.syborgtwinturbo.com/album...26_Josh_15.jpg

Looks great Marty! :thumbsup:

I can't wait to see it finished soon. Cool times.