Lateral-g Forums
Page 26 of 78 « First 162425 26 27283676 Last »
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)
-   -   69 Camaro Project - Dead Pool (https://www.lateral-g.net/forums/showthread.php?t=31246)

Flash68 07-26-2012 09:07 PM
This car gets faster every week and you've never even driven it yet. :unibrow:

Ron in SoCal 07-26-2012 09:09 PM
Just ask Rick. Dual flywheels balance out my twin disk clutch. I tried three but something wasn't right.

FETorino 07-26-2012 09:09 PM
Quote:
Originally Posted by Flash68 (Post 426974)
This car gets faster every week and you've never even driven it yet. :unibrow:
Dave did you mean to post this in your thread :unibrow:

Lenie 07-26-2012 09:29 PM
Quote:
Originally Posted by Ron in SoCal (Post 421724)
Hey guys, sorry for the late reply...planes, trains and automobiles for the last 20 hours. Anyway thanks for the props! Car looks like it's sitting right, maybe a tad low. When I return next week I'll get the rear to the PCoater and a few other R&D items and then we move to finish assembly. So no Bryan, that 30 days aint firm...:lol: Brett continues to be meticulous (sp?)in his approach and I really appreciate that about him. :thumbsup:

Wheels are 19x12/335 and 18x10/285. Let me know if you want BS or aspect ratio.

And Marcus, the car will be flogged. I'm not a car show guy...:D
Those aren't pillows!:wow: Looking forward to more Pics:unibrow:

Ron in SoCal 07-26-2012 09:44 PM
Quote:
Originally Posted by Lenie (Post 426982)
Those aren't pillows!:wow: Looking forward to more Pics:unibrow:
You first Bro :D

chr2002ca 07-27-2012 08:12 AM
Quote:
Originally Posted by FETorino (Post 426976)
Dave did you mean to post this in your thread :unibrow:
The banter between you guys is just priceless. It's in almost every thread! Cracks me up to no end. Keep layin' it on thick fellas.

Ron, I'll most likely be having a chat with you about your final clutch solution to pick your brain. I'm leaning towards the Centerforce DYAD, but still considering an RST with aluminum flywheel also. Look forward to your end result(as you probably do too!) and feedback. :thumbsup:

Ron in SoCal 07-27-2012 08:27 AM
Quote:
Originally Posted by chr2002ca (Post 427066)
The banter between you guys is just priceless. It's in almost every thread! Cracks me up to no end. Keep layin' it on thick fellas.

Ron, I'll most likely be having a chat with you about your final clutch solution to pick your brain. I'm leaning towards the Centerforce DYAD, but still considering an RST with aluminum flywheel also. Look forward to your end result(as you probably do too!) and feedback. :thumbsup:
Call anytime Chris. Just yesterday got all the little pieces needed to mate the drivetrain and within tolerances needed to actually function properly. I'll let you know how that goes...

frankv11 07-27-2012 02:00 PM
Ron summer is been here and car is not on the streets yet, come on my boi

CamaroAJ 07-27-2012 06:54 PM
Quote:
Originally Posted by Ron in SoCal (Post 426975)
Just ask Rick. Dual flywheels balance out my twin disk clutch. I tried three but something wasn't right.
need even numbers to counter balance:unibrow:

67zo6Camaro 07-27-2012 11:33 PM
Fab53
 
lateral-g

67zo6Camaro 07-27-2012 11:43 PM
Fab53
 
lateral-g

67zo6Camaro 07-28-2012 12:10 AM
Fab53
 
lateral-g

Greg from Aus 07-28-2012 12:16 AM
Hi Brett, can you please let me know what brand the reservoirs and bracket are as I need the same for my project.

Thanks
Greg

GregWeld 07-28-2012 06:30 AM
Bret ---

I have a couple of the 90* slotted 'jigs' that I use just like you have shown in your photos....

One of the things I did with my table - was to drill and tap (table is 1/2" steel) various combinations so I can just "bolt" the 90's to the table in various positions. It's fast and I don't end up with clamps for the 90 in my way.

Now - since I consider these "tools" - I just need to figure out what to do with them now that I have 'em. :D

Ron in SoCal 07-28-2012 08:38 AM
Quote:
Originally Posted by tonner (Post 427265)
Hi Brett, can you please let me know what brand the reservoirs and bracket are as I need the same for my project.

Thanks
Greg
Hey Greg those are made by JCG. As Mr Weld would say, 'you can always call Chris and add a little billet'...:D

Greg from Aus 07-28-2012 05:08 PM
Quote:
Originally Posted by Ron in SoCal (Post 427291)
Hey Greg those are made by JCG. As Mr Weld would say, 'you can always call Chris and add a little billet'...:D
Thanks Ron,

I will give him a call.

Greg

67zo6Camaro 07-28-2012 06:07 PM
lateral-g

OVRKILL 07-29-2012 07:44 AM
Off the charts detail Ron....love....this....car! :bow:

Did I see you're going to SEMA?

67zo6Camaro 07-29-2012 04:43 PM
Fab53
 
lateral-g

67zo6Camaro 07-29-2012 04:50 PM
Fab53
 
lateral-g

67zo6Camaro 07-29-2012 09:18 PM
Fab53
 
lateral-g

Vegas69 07-29-2012 09:47 PM
Man, does that look sweet. :thumbsup:

Rick D 07-29-2012 09:52 PM
Not bad I guess :rolleyes:

For garage build :P

J/k looks great Brett :cheers:

Ron I will call you tomorrow. But looks good for this week :woot:

Track Junky 07-29-2012 09:59 PM
Thats clean looking. Nice job Bret. :thumbsup:

Flash68 07-29-2012 10:00 PM
Wow. Now THAT is a real PT Camaro. :unibrow: Looks killer.

canrc 07-29-2012 10:01 PM
Looks Great! :thumbsup:

Ron in SoCal 07-29-2012 10:12 PM
Quote:
Originally Posted by OVRKILL (Post 427429)
Off the charts detail Ron....love....this....car! :bow:

Did I see you're going to SEMA?
Hey Brother! How's the monster doing? I'll be at SEMA, may drive the car there if Todd let's me park in his garage...:D

Quote:
Originally Posted by Vegas69 (Post 427566)
Man, does that look sweet. :thumbsup:
Quote:
Originally Posted by Rick D (Post 427567)
Not bad I guess :rolleyes:

For garage build :P

J/k looks great Brett :cheers:

Ron I will call you tomorrow. But looks good for this week :woot:
Quote:
Originally Posted by Track Junky (Post 427571)
Thats clean looking. Nice job Bret. :thumbsup:
Quote:
Originally Posted by Flash68 (Post 427573)
Wow. Now THAT is a real PT Camaro. :unibrow: Looks killer.
Quote:
Originally Posted by canrc (Post 427574)
Looks Great! :thumbsup:
Thx fellas! Just for the record, Brett's holding out. Musta taken a page out of Marty's book. :lol:

Lenie 07-29-2012 10:24 PM
How are we all going to park in Todd's garage?:D :lol: Ron, there are no short cuts on your car dude, everything looks spectacular:thumbsup:

Ron in SoCal 07-29-2012 10:30 PM
Quote:
Originally Posted by Lenie (Post 427581)
How are we all going to park in Todd's garage?:D :lol: Ron, there are no short cuts on your car dude, everything looks spectacular:thumbsup:
Thanks Lenie! Todd should have at least one extra spot by then. :lol:

Lenie 07-29-2012 10:36 PM
Quote:
Originally Posted by Ron in SoCal (Post 427584)
Thanks Lenie! Todd should have at least one extra spot by then. :lol:
Now that's funny!

chr2002ca 07-30-2012 07:41 AM
Gorgeous setup. Top-notch as always. :thumbsup:

slenning 07-30-2012 08:09 AM
Quote:
Originally Posted by Ron in SoCal (Post 426970)
Hey Steve! Thx for the compliment. Parts rolled in today, so an update is coming soon. Still have a few issues to sort out. Are you coming to SEMA this year? :cheers:
You bet!! Hope to see you AND your Camaro there and have a couple :cheers:

OVRKILL 07-30-2012 12:01 PM
Quote:
Originally Posted by Ron in SoCal (Post 427578)
Hey Brother! How's the monster doing? I'll be at SEMA, may drive the car there if Todd let's me park in his garage...:D
Monster is gettin close....may be updating my thread from "breaking the mold" to Project SEMA :_paranoid

I've got a spot out there, so its full court press time :unibrow:

67zo6Camaro 07-30-2012 12:18 PM
lateral-g

tones2SS 07-30-2012 05:36 PM
Looks great Ron.

214Chevy 07-30-2012 08:55 PM
I'm loving every stage of this build. You keep raisng the bar.:hail: :hail:

waynieZ 07-30-2012 09:32 PM
Thats a slick set up, Nice work.

67zo6Camaro 07-31-2012 10:04 PM
Fab53 floater installation
 
lateral-g

67zo6Camaro 07-31-2012 10:11 PM
Fab53 floater rear end installation
 
lateral-g

67zo6Camaro 07-31-2012 10:19 PM
Fab53 Floater rear end installation
 
lateral-g


All times are GMT -7. The time now is 08:27 AM.
Page 26 of 78 « First 162425 26 27283676 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net