Lateral-g Forums - HRBS Introduces “Shop Bitch” 1967 Nova Build

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)

- - HRBS Introduces “Shop Bitch” 1967 Nova Build (https://www.lateral-g.net/forums/showthread.php?t=25413)

So cool how you blended the two tone right through the steering wheel. It's all in the little details..:thumbsup:

holly cow that car came out AMAZING!!!!!!!!!! the attention to detail is what makes this car different that other "off the shelf cars"

After much though, it seemed I just wasnt happy with "our" one piece taillights. The fitment (size) needed work and since we arent in the "Billet Parts" industry it was apparent that our lights would take more time to perfect than I would rather give them. Pascual and Judas over at Marquez Design stepped up and supplied us with a "Pre Production" set to spread the word on their soon to be released 66/67 Billet Tail Lights. Some of you may have seen these at SEMA last year. They are 3D machined from Solid Billet and feature sequential LED brake and turn signals. They will be available in solid red or with white back-up light. Both will be available in polished or black anodized. These are a functional works of art !
Check out the easy installation:

First remove your existing lights and mark the holes from the template:
http://i241.photobucket.com/albums/f...vaBuild2/1.jpg

Second, drill the holes:
http://i241.photobucket.com/albums/f...vaBuild2/2.jpg

Third, apply a thin gasket (supplied) and mount:
http://i241.photobucket.com/albums/f...vaBuild2/3.jpg

Last, hook up wiring connection and sit back and stare:
http://i241.photobucket.com/albums/f...vaBuild2/4.jpg

Wow, congratulations Marquez Design, those tails are so clean, I love the way they look, they fit in any kind of build!

I gotta have a pair of those once they are released! They look absolutely awesome!

very trick! Where did you get the air cleaner top/base??

Quote:

Originally Posted by 6D9 (Post 357768)

very trick! Where did you get the air cleaner top/base??

Its an Edelbrock Air Cleaner that we machined to eliminate the fins. We then Machined a 1/2" wide by 1/16" deep groove that matches the valve covers. The trim pieces were made from Clayton Machine Billet Strips.

As we load up the Nova for Columbus, I realized not everyone here will get to see it finished. So for those who arent going to make the trip, here are some (almost) finished pics just for you...... We look forward to a great trip and meeting alot of you out there. :thumbsup:

http://i241.photobucket.com/albums/f...2/IMG_1018.jpg

http://i241.photobucket.com/albums/f...2/IMG_1021.jpg

Looks great! I'll see ya there.
-Gary

Steve,

The car came out beautiful! Really enjoyed the build thread. Great job :thumbsup:

Rich