That’s a lot of winning right there!

Oh hell yeah!!

Wet sanding and polishing nearing completion.

https://i.postimg.cc/y65d1Zyx/A8-B37...-F62-A7180.jpg

https://i.postimg.cc/XNZ5k32Z/52-D9-...26048970-E.jpg

https://i.postimg.cc/3rPvL66t/ADF930...78-C522-D5.jpg

A little dusty but the tape line turned out well.

https://i.postimg.cc/sD7ZbmCs/C1-E3-...916-DDD307.jpg

And the new brakes came in...Aero6 and Aero4 both in race spec and custom color. :G-Dub:

https://i.postimg.cc/mDgDD3nz/D616-B...-EF5-F87-F.jpg

https://i.postimg.cc/7ZSbQZ76/51755-...-F597-F647.jpg

https://i.postimg.cc/J4fGqksv/4-B2-C...37-A237-FF.jpg

Just went through this entire thread...... One word - STUNNING. The work and craftsmanship are top shelf!!

Thank you! I would put their work on par with any one of the top builders.

https://i.postimg.cc/y8Fz23rt/DF69-C...7-F4-A10-D.jpg

Front drive assembly completed...engine harness next...pardon the dust

https://i.postimg.cc/JzwLT5Kj/C4454-...F184-FBFAC.jpg

Engine is assembled and wired. Most visible hardware replaced with ARP SS 12pt bolts. Have to come up with a 3d scanner and make some coil covers. Open to other ideas as well....anyone?

https://i.postimg.cc/DfP94nFs/2-BC61...CDFDF0-B73.jpg

https://i.postimg.cc/MHqg3r0v/0-B9-D...-BA572-F94.jpg

https://i.postimg.cc/tJkwKtDD/0-E493...8-F9683770.jpg

The exciting part of the car going back together is underway.

https://i.postimg.cc/YqvYvNmW/131979...2-BCF060-A.jpg

https://i.postimg.cc/CKsf3m9W/FA4-D7...B0-A25-E05.jpg

https://i.postimg.cc/fbN9q6qc/FD6-AF...20-DEB7937.jpg

Incredible build. I can't wait to hear your thoughts on the SB4.

Sent from my SM-N975F using Tapatalk