Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)
-   -   Mali2ude final build for Power Tour 08 (https://www.lateral-g.net/forums/showthread.php?t=13736)

camcojb 04-20-2008 02:03 PM

Quote:

Originally Posted by Speedster (Post 146126)
Jody -

What amazes me most about your car is how you have taken 10lbs of "stuff", put it in a 5 lb bag and still make it look incredibly clean. I am sure looking up from down below is a maze, but from top down, you have pulled off a miracle.

You are going to have to publish your own 3 Volume Service Manual for that thing!! :thumbsup:

that's a very good analogy Bruce; now with the intercooler and intake plumbing it's more like 15 pounds in a five pound sack........... :faint:

Jody

awr68 04-20-2008 05:14 PM

Don't forget about the radiator hoses! ;) Your IC has one in and one out right? That should be a little easier than 2 in & 2 out like you had planned for the Camaro.

Are the A/C lines already fabbed up?

Keep up the pace, you'll make it!

clill 04-20-2008 05:38 PM

Jody...We are running short on time. You need to round up the usual suspects and have them help fab that 10lbs of stuff.:willy:

camcojb 04-20-2008 06:13 PM

well, I started on the intercooler, air inlet, and radiator tubing today. Fabbed up the inlet first. Everything is just tacked as I have a guy who can copy my tacked together pieces and make it a one piece tube.


http://www.camcojb.com/temp/malitude%20491.jpg

http://www.camcojb.com/temp/malitude%20492.jpg

http://www.camcojb.com/temp/malitude%20496.jpg

Then started the intercooler to throttle body. Very tight to get past the air inlet, turbo to intercooler hose, and lower radiator hose, but it clears.

http://www.camcojb.com/temp/malitude%20497.jpg

http://www.camcojb.com/temp/malitude%20499.jpg

camcojb 04-20-2008 06:18 PM

http://www.camcojb.com/temp/malitude%20500.jpg

http://www.camcojb.com/temp/malitude%20503.jpg

http://www.camcojb.com/temp/malitude%20505.jpg

67turbostang 04-20-2008 10:11 PM

Very nice Jody. That intercooler tubing looks like a tight fit, but its looking great. The Malibu keeps looking better and better. Keep up the good work

camcojb 04-20-2008 11:06 PM

finished the intercooler to throttle body tubing (made it 2 piece as you cannot remove it as one piece), both radiator hoses, and the air inlets for both turbos. All that's left is the (2) turbo to intercooler lines, merging into one inlet; this will be the hardest part, so I saved it for last............. :yes:

Once finished I'll take all the individual lines I made and have them copied in stainless or steel as one-piece units, so no weld lines.

http://www.camcojb.com/temp/malitude 508.jpg

http://www.camcojb.com/temp/malitude 509.jpg

http://www.camcojb.com/temp/malitude 511.jpg

Jody

Tom.A 04-20-2008 11:10 PM

Not to be a broken record, but your car and attention to detail is awesome:bow:

camcojb 04-20-2008 11:20 PM

Quote:

Originally Posted by tom_a (Post 146219)
Not to be a broken record, but your car and attention to detail is awesome:bow:

thanks Tom. I've said it before, but detailing and neatness doesn't cost anything, just a bit of time and some forethought. Anybody can do it.

Jody

customcam 04-21-2008 12:28 AM

an awsome street monster Jody :wow:
love it man


All times are GMT -7. The time now is 11:36 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net