Lateral-g Forums - This is MY 67 Camaro

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)

- - This is MY 67 Camaro (https://www.lateral-g.net/forums/showthread.php?t=34830)

Man it is HOT and working in the garage is like an oven .... when I grow up I will have A/C and heat in my garage :lol:
Any way .... not much happening, got back from Utah yesterday and got in the garage today to prep my doors for some epoxy, one done and one left. Man I am glad it's not a four door :willy:

My boys are coming out here in a few weeks and I need to clean out their rooms ... I have been storing parts in their rooms :thumbsup: where else can I keep parts clean and organized, right? So I need to get some epoxy on the doors and hang them, bolt the trunk lid on, put the door skin, dash and filler panel in my room I guess :lol:

I still need to do the jambs ... that lacquer paint just gums up when you try sanding it off, so paint remover is required!

http://img845.imageshack.us/img845/6968/120630933.jpg
Little bit of time here!
http://img33.imageshack.us/img33/1065/120630904.jpg
Ready for epoxy
http://img99.imageshack.us/img99/6382/120630909.jpg
Paint remover is required on the jambs:(

Getting there a little at a time ....
Thanks

I know its in the thread somewhere but what are you using to clean everything up.Great job.

Quote:

Originally Posted by coolwelder62 (Post 422247)

I know its in the thread somewhere but what are you using to clean everything up.Great job.

I am using my trusted DeWalt drill and a fiber disc (from Harbor Freight) and assorted wire wheels, I use my air grinder sometimes with coarse roloc discs. Just takes time to see it through .... so I get started on a piece and keep going til it's done!
Thanks for looking

Chief you do awesome work! Very impressive.

Hey if you think it's hot up there in Colorado, come on down to Las Vegas for a few. :yes:

:captain:

Quote:

Originally Posted by Spiffav8 (Post 422253)

Chief you do awesome work! Very impressive.

Hey if you think it's hot up there in Colorado, come on down to Las Vegas for a few. :yes:

:captain:

True that...

Quote:

Originally Posted by Spiffav8 (Post 422253)

Chief you do awesome work! Very impressive.

Hey if you think it's hot up there in Colorado, come on down to Las Vegas for a few. :yes:

:captain:

Yeah .... no thanks, but for Colorado weather to be in the 100's already that is way too early.

Thanks for the compliments.

Chief they're looking great..

Quote:

Originally Posted by Sonar Chief (Post 422249)

Thank's,I need to clean the bottom of my 66 Chevelle like this so I can rhino line it.:thumbsup:

Quote:

Originally Posted by waynieZ (Post 422280)

Chief they're looking great..

Thanks for the words ... they mean a lot coming from you.

I had a moment last nite, I said the paint on the doors was being a bugger to get off cuz it was lacquer ... DUHHHHH, I used some lacquer thinner and got the paint broken down enough to disc off. One door done and one more to go .... that's my goal today.

Thanks for looking .... more to come:thumbsup:

Quote:

Originally Posted by coolwelder62 (Post 422281)

Thank's,I need to clean the bottom of my 66 Chevelle like this so I can rhino line it.:thumbsup:

Good luck with the pan ... keep going and then you are done :thumbsup: :thumbsup: