All of the wires neatly run under the manifold.

http://www.syborgtwinturbo.com/album...9_07_KD_15.jpg

All that is left is to shrink wrap the all of the fitting to keep the colors dark.

http://www.syborgtwinturbo.com/album...9_07_KD_17.jpg

Once again I owe Big Al big for helping us out.

so i see you cut the rear cover off the manifold... why did you do this marty, plus the wiring is seriously clean.

It just didn't look right - so off it went.

Next time were going to make it out of chipboard

Good Afternoon all,

Plumbing the AC Lines is complete.

http://www.syborgtwinturbo.com/album..._05_KD_013.jpg

The lines will be clamped together with a couple Billet Specialties Line Clamps
and then anchored to the inner fender.

http://www.syborgtwinturbo.com/album..._05_KD_016.jpg

Kenny had to do a little trimming on the Billet Specialties lower bracket to install the crank trigger.

http://www.syborgtwinturbo.com/album...09_06_KD_4.jpg

Sorry Mike - this is the best picture I have of the Crank trigger installed.

http://www.syborgtwinturbo.com/album...09_06_KD_8.jpg

Looking great!!!!!


--Eric

Looking sweet!!
Can you tell me where to get that back space tool.

Looking great as usual Marty!
How much longer before you can drive it :cheers:

You used to be able to get it from a company called Wheel Tech.

I do loan / rent it out if you need to use one. Plus there expensive as all get out.

Well with winter just around the corner it won't be driving this year. But it will be running pretty soon.

Just Haul it down to me in Arizona we can drive it all year long

Tonny

It better be running REAL soon!! Still SEMA bound....right??

Okay that seems a little unfair the least you could do is come pick it up

I think we can handle that :hail:

Tonny

Good Morning all,

Just a couple quick shots of the intercooler plumbing.

http://www.syborgtwinturbo.com/album...09_07_kd_6.jpg

http://www.syborgtwinturbo.com/album...9_07_kd_19.jpg

Some how this Pipe hit the inner Fender.
So it looks like were going to have to redo this pipe.

http://www.syborgtwinturbo.com/album...9_07_kd_78.jpg

Plenty of Clearence of the Drives Side

http://www.syborgtwinturbo.com/album...9_07_kd_82.jpg

http://www.syborgtwinturbo.com/album...9_07_kd_99.jpg

http://www.syborgtwinturbo.com/album..._07_kd_100.jpg

Thanks for the update. Will the bumper hide the tubes going into the intercooler?

Actually they will be hidden by the front cover and fenders.

http://www.syborgtwinturbo.com/album...9_23_r_262.jpg

http://www.syborgtwinturbo.com/album...9_07_kd_99.jpg

Good Afternoon,

Fuel Line plumbing has begun.
Out of the tank and into the Aeromotive Fuel Filter & A1000 Pump.

http://www.syborgtwinturbo.com/album...9_07_kd_66.jpg

Out of the Pump and into the Aeromotive Fuel Pressure Regulator and 10 Micron Filter

http://www.syborgtwinturbo.com/album...9_07_kd_58.jpg

From the Filter to the Y-Block under the cab.
Why the Y-Block just in case we go old school on the Fuel Line plumbing.

http://www.syborgtwinturbo.com/album...9_07_kd_63.jpg

Up to the fuel rail

http://www.syborgtwinturbo.com/album...9_07_kd_85.jpg

Across & Under to the other rail.

http://www.syborgtwinturbo.com/album...9_07_kd_11.jpg

And it ends on the other side.
Yep - no return line.

http://www.syborgtwinturbo.com/album...9_07_kd_12.jpg

Top View - just to show you the engine bay.

http://www.syborgtwinturbo.com/album...9_07_kd_39.jpg

lookin real good
 

how close are you?

Are these current or are you just leading us along because it is done and on its way?

Hi Payton,

How close are we - pretty close.

The bad new is that it's not heading to sema. Seems some budget got a little tight and in the end it worked out better for all to skip Sema.

ps pics are from early Sept.

Marty,
Have you been holding out on us? Is the truck done? How does it sound wide open? You dog...

You have been a little quite lately
 

I figured you were further along.

Sorry about the SEMA deal. Really looking forward to seeing this truck on the road.

My family lives in North Little Rock, Ar. I thought I was going there for Thanksgiving and I was going to ride up there and take a look for myself. My plans changed. Hopefully you will bring it to Year One event.

It will be out next year for sure

just forward me the date and I'll ask the boss if I can go ( my wife )

Sorry you won't be able to make it out Marty. Was looking forward to meeting you and seeing the truck in person. Can't wait to see it done.

Brent

Hi Brent,

Good news - Bad News

I'm going to Sema and the truck isn't

So I'll see ya on Thursday

Good Morning All,

http://www.syborgtwinturbo.com/album...works_logo.jpg

What started out as a bunch of tubing has turned into a great looking Exhaust.
I ordered the Stainless Steel Rod Builder Kit from Stainless Works.Net and Dave did the rest.

http://www.syborgtwinturbo.com/album..._08_31_054.jpg

http://www.syborgtwinturbo.com/album...09_07_KD_6.jpg

Mike at Race Proven Motors.com provided us will all of the Stainless Steel V-Band Flanges

http://www.syborgtwinturbo.com/album...09_07_KD_8.jpg

Picture of the exhaust tucked into the frame.

http://www.syborgtwinturbo.com/album...9_07_KD_28.jpg

http://www.syborgtwinturbo.com/album...9_07_KD_31.jpg

http://www.syborgtwinturbo.com/album...9_07_KD_32.jpg

Once again if your looking for stainless steel exhaust call the guy's at Stainless Works.net

Good Morning All,

Kenny's been busy wiring, so I thought I would share a couple pictures of the Engine bay.

http://www.syborgtwinturbo.com/album...9_07_KD_86.jpg

http://www.syborgtwinturbo.com/album...9_07_KD_95.jpg

Now this is what a Syclone's Engine bay looks like

http://www.syborgtwinturbo.com/album...d_026_1280.jpg

Still to Do
Paint Valve Covers, Intake Plenum & Air Intake Tubing
Plumb Oil Lines & finish engine bay Pluming.

Good Afternoon All,

To say I'm happy with the work that Kenny is doing on the truck would be an understatement.
The guys at Kenny Davis Hot Rods have really exceeded my expectation on this truck.

Quick Pictures of the Air Ride Double Adjustable Shock Wave.

http://www.syborgtwinturbo.com/album...9_07_KD_30.jpg

Looks like were going to be using the clear taillights on the truck.
They look the best and stand out the least.

http://www.syborgtwinturbo.com/album...9_07_KD_70.jpg

Kenny getting ready to install the guages in the dash panel from Docs Kustom.

http://www.syborgtwinturbo.com/album...9_07_KD_73.jpg

The ground effects and what you see on this cart is all that is left.
Wow are we close.

http://www.syborgtwinturbo.com/album...9_07_KD_75.jpg

Hey Marty,

Any chance you can snap a pic or 2 of that white Dually in the last pics.

Just like mine and i'm looking to put it on the ground!!!

Looks killer!

Thanks,

Lead.

Not a problem

http://garagescene.net/gallery2/d/10...+Truck+_1_.JPG

http://garagescene.net/gallery2/d/10...+Truck+_3_.JPG

http://garagescene.net/gallery2/d/10...+Truck+_7_.JPG

marty
 

Hey syborg tt it was nice to put a face with the posts That was a good idea to put a picture of your truck in your badge ( it gave you up) Good luck with projects looking good :thumbsup:
Randy

AWaawawawaw......:drool: :wow:

Holy .....!!!!!! THAT is how it need to be!

Thanks you VERY MUCH!

Lead.
if you ever come across the specs (susp/wheels-spacer/adapters) feel free to pm me.... :-) or here if you like. thanks again, what an inspiration. getting the torch out now...

I'll see if I can get them from Travis

hey Randy,

I figured it was the camera that gave me away.

It was good meeting you and your car is incredible - I can't wait to see it done.

If I have to ask, How much for Tavis to fix up my Dulllley like that?

Mick

for you $20 bucks

we will sell that one for 25k

I take trades too:thumbsup: