Lateral-g Forums - Need advice for Drawing/Designing Software

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Open Discussion (https://www.lateral-g.net/forums/forumdisplay.php?f=14)

- - Need advice for Drawing/Designing Software (https://www.lateral-g.net/forums/showthread.php?t=12734)

I don't know if it'll run on a mac, but I've been working with Autodesk's new Alias Studio Automotive version, and it's really trick! You can run it two ways, as a CAD program, or a sketch program.

To All:

Are any of you familiar with this product?

IMSI TurboCAD Mac Pro v3

http://store.apple.com/1-800-MY-APPL.../A&mco=5813C4A

Here is a list of the MAC Software dealing with designing.

http://store.apple.com/1-800-MY-APPL...are/pro_design

Anther page, (Some Overlaps)

http://store.apple.com/1-800-MY-APPL...ative_software

Based on your knowledge, does any of this look like it would be able to create a drawing and put it into such a format that other programs could read it enough to cut a part or ???

Thanks for any help further that you can offer. I'm still struggling a bit with the right choice.

Thanks again for all your help.

Best Regards,

Ty