Lateral-g Forums - C6ZO6 caliper & parking brake brackets for a Ford 9" from KORE

Page 3 of 3

Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Open Discussion (https://www.lateral-g.net/forums/forumdisplay.php?f=14)

- - C6ZO6 caliper & parking brake brackets for a Ford 9" from KORE (https://www.lateral-g.net/forums/showthread.php?t=14127)

ProTouring442

03-27-2008 05:38 PM

Quote:

Originally Posted by XcYZ (Post 142291)

I have the Torino style big bearing housing ends and that's what I'd recommend. Its 2.5" housing face to axle flange gives enough room for the DIH parking brake.

Here's what Tobin at KORE told me about his brackets and Ford housings:

Ok,so how do I know which I have?

Shiny Side Up!
Bill

ohcbird

03-27-2008 06:17 PM

axle flange diagram

This is from Wilwood's site: (right click & save it as a reference picture)

http://www.wilwood.com/BrakeKits/Pag...DIAGRAM001.jpg

ProTouring442

03-28-2008 03:29 AM

Thanks!

So, from this chart, it looks as though I have the "Big Ford (New Style) housings. Is this what I need for this kit? I hope!

Shiny Side Up!
Bill

7TSS	03-28-2008 12:55 PM

Quote:

Originally Posted by ProTouring442 (Post 142656)

Thanks!

So, from this chart, it looks as though I have the "Big Ford (New Style) housings. Is this what I need for this kit? I hope!

Shiny Side Up!
Bill

Yup. The new style big ford end is what you need. :thumbsup:

All times are GMT -7. The time now is 02:00 PM.

Page 3 of 3

Show 40 post(s) from this thread on one page