Lateral-g Forums - Got my new Speed Tech subframe

Page 3 of 3

Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Chassis and Suspension (https://www.lateral-g.net/forums/forumdisplay.php?f=38)

- - Got my new Speed Tech subframe (https://www.lateral-g.net/forums/showthread.php?t=15259)

tones2SS

05-25-2009 09:10 AM

I've seen the Speed-Tech sub frame in person on Tony's car, KARMA and was very impressed. I thought it looked killer.:bow: I am going to do the Speed-Tech subframe and rear as well for sure if I cannot afford to go DSE.
For will69camaro; I do believe Tony is running a supercharger on his car so it may fit under the hood without any worries.
Very nice sub frame. ENJOY!!! :thumbsup: :cheers:

Blake Foster

05-25-2009 09:34 PM

thanks glad to hear you like it, and just a note our rear is the same price as the other one

tones2SS

05-26-2009 04:24 PM

Quote:

Originally Posted by killer69 (Post 214656)

thanks glad to hear you like it, and just a note our rear is the same price as the other one

You're welcome. Just calling it as I see it.:thumbsup: :cheers:
I LOVE the KILLER '69 Camaro as well. One of my many faves.:lateral: :cheers:

Blake Foster

05-26-2009 06:02 PM

Quote:

Originally Posted by will69camaro (Post 214477)

Another interesting question on this. I know of someone that put a LS2 in his car on stock sub and used the mounts that dropped the engine to get his KB to fit under a stock height cowl. Does the speedtech frame lower the engine any? There is a possibility of running a blower on my car and I really want it to fit under a stock cowl hood.

Maybe not the right area to ask but we're discussing the speedtech frame so worth a shot!

William

p.s. That frame looks NICE!

If you were to get me some measurements from the block top to the top of the blower i can put our mock up together and let you know how much room there is. but i can tell you it is low, the ATS oil pan is about 3/8 above the rack. check with Project Evade's owner Bill as his is installed and he has a stock CF cowl hood he may be able to give you a faster answer.

awr68

05-26-2009 08:45 PM

Quote:

Originally Posted by tones2SS (Post 214495)

I do believe Tony is running a supercharger on his car so it may fit under the hood without any worries.
Very nice sub frame. ENJOY!!! :thumbsup: :cheers:

I am using a ProCharger. Thanks for the kind words! I love the frame too!! :thumbsup:

boonedog

05-27-2009 12:20 PM

hey anthony what procharger setup are you running on your lt1? I need some brackets to work with my lt1 i have a d1sc kit i got on trade thats for a 95 lt1 fbody but it mounts to low.

awr68

05-27-2009 06:49 PM

I am using the stock LT1 f-body bracket that mounts all accessories on the pass side head and then the standard SBC ProCharger kit that mounts it high on the DS head.

The LT1 ProCharger bracket mounts it too low, you would have to notch the frame in order to use it.

Here's a mock up pic.
http://i235.photobucket.com/albums/e.../DSCF19301.jpg

boonedog

05-28-2009 05:09 PM

Quote:

Originally Posted by awr68 (Post 214985)

did you have to do anthing special to space the bracket out? Doesnt the procharger set out further on the lt1 than the sb?

awr68

05-29-2009 12:39 AM

Quote:

Originally Posted by boonedog (Post 215171)

did you have to do anthing special to space the bracket out? Doesnt the procharger set out further on the lt1 than the sb?

Yes, I still have to fab up a spacer.

boonedog

05-29-2009 12:25 PM

thanks sorry to hijack the thread

All times are GMT -7. The time now is 04:45 AM.

Page 3 of 3

Show 40 post(s) from this thread on one page