Ok, just got off the phone with them and I'm going to try and have them design a set for my 67 with the modern look like the 69 they made for the blue camaro on their contact page. They said it's about a month out, so I think I can wait but my car goes in for major body work in 2 to 3 weeks. By then I may go down there and see if they can cut me out a custom set if possible. Very nice people over the phone by the way.

Mike

Thanks Mike, you probably spoke with Pascuals brother. We have 4 designs for changing the trim on the lense, and there may be a similar one to the modern 69 already drawn up. I'll talk to Pascual Friday when he gets back in town and let you know.Jody

Thanks again Jody. I'm a huge fan of your cars and your work. It's a pleasure to talk to you.

Thanks again
Mike

Jody, did you mention an even smaller profile one awhile back? I like these and would settle for these if there won't be any real design changes, but would like something still less bulky.

Mike

edit: nevermind, I did not pay attn the posts above. I think I am losing it.

Any updates on availability? :D

Maybe I missed it, but will these bezels work with the stock lenses/lights/etc? I'm actually not running the stock ones - got the LED setup from Technostalgia, so I'm hoping that will fit.

They're coming is all I can say. They come with a lense, but use the stock housings or any that bolt up the same as stock.

Jody

........Available with the single, one color lens (with LEDS)....... like on the 67 RS ??

And not to be too intrusive, will the lens (with LEDS) be available by themselves to fit the factory bezels ??

Put me on the list for either........ :D

67-68 Taillight
 

The 67-68 taillight is going to offered in a few trim options. We currently have three designs of the filler trim that we will be offering to fit in the inside perimeter of the billet housing. 1. Small trim around the outer perimiter of the red lens to make the lens about 1/4 inch smaller, 2. A trim that will split the lens in half, similar to the 68 design and, 3. One that has a small back up light in the center of the lens. We will post pictures of the lights with all three options when we have them done.

I would have made more agressive changes to the light housing itself, but we had some design limitations that we needed to work around. In additon we will be offering a matching billet gas cap, and a set of rally sport back-up lights with the taillights.

I believe our light improved the rear look of 67-68 Camaros. However, the lights can appear stock if one was willing to have them plated in chrome and paint the center of the billet black.


We still need to have new gaskets made and have the billet trim inserts laser cut before we release them to the public, but a certain few will be getting the first few for feedback. The light fits very nice and it will accept the factory stamped sheet metal light housing. We will try very hard to release them to the Market before SEMA.

We are in the process of developing a new look with LED's. It is very unique from what is currently available on the market. We have many ideas for 67-68 Camaros and will pursue them all in time.

pascual
marquez design

Thanks or the update, remember I have a stock tail panel if you are looking for feedback!?! ;)

I would be very interested in these as well. IF available I will purchase.
[email protected]