That truck is so amazing and so brutal! Cant take my eyes of it...

i should have used these Billet
or these

I did not think anyone else on this board also was on the HAMB ! !

:thumbsup: I guess the rest of us guys will just have to keep dreaming.....

R.P.

Well I ordered the wheels
 

I ordered the Muroc wheels form Budnik and They said 6-8 weeks for the wheels. I ordered 22 x 10 with 6" back space and 20 x 8.5 with 5.75 back space. I'm waiting on the wheels to set it on the ground. I'm ready to lengthen the torque tube and I should have the bed sides made by friday.


http://www.budnikwheels.com/roadwhee...3&pid=746&pg=4

Rodger

Please elaborate on how you plane to length the torque tube. This has always bin of interest to me.

good choice on the wheels that will look nice :yes:

Lengthen the torque tube
 

Well The torque tube is actually a tube with a drive shaft in it with no U joints. I cut the tube into 2 pieces in my big band saw then I chucked each end up in the lathe to cut the welded tube out of the ends. then i went to my steel supply house and ordered 8 ft of 5" 3/13 wall aluminum which is the same size as the old tube. Then I will mock up the pieces in the car to get a true length then bolt everything in the car and square the pieces and slowly weld the ends to the tube. Then I will send out the driveshaft to be lengthened.

Rodger

I got the brakes
 

Well I got a call From Wilwood this morning and the brakes are a go, they made me a sweet deal. I got the 14" ones with the red calipers. They are all drilled and sloted and all that good stuff. I got 6 piston fronts and 4 piston rear. They should be here in about 3-4 weeks.

Rodger