Lateral-g Forums
Page 3 of 3 12 3
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   LSX Conversions (https://www.lateral-g.net/forums/forumdisplay.php?f=70)
-   -   Pics of Dynatech LS first gen camaro headers as requested (https://www.lateral-g.net/forums/showthread.php?t=29744)

ma73z 04-11-2013 10:37 AM
Quote:
Originally Posted by KSBRKTRACER (Post 474800)
I know this is an old thread , but I have a couple of questions ...... Is there header made that has better ground clearance...? These appear to hang down a little bit too much for my liking. Does anyone have any suggestions : I am doing a stock subframe , stock Power steering gear box , and it has factory air conditioning in a 69 . I am going to use a 6.0 and LS-3 heads is my plans.
Not sure if this helps but I have some Hedman 45120 mid length mocked up on my 2nd gen and am pretty happy with them. I'm sure they probably make something for you 1st gen guys also.

NvrDun71 04-11-2013 12:31 PM
Quote:
Originally Posted by KSBRKTRACER (Post 474800)
I know this is an old thread , but I have a couple of questions ...... Is there header made that has better ground clearance...? These appear to hang down a little bit too much for my liking. Does anyone have any suggestions : I am doing a stock subframe , stock Power steering gear box , and it has factory air conditioning in a 69 . I am going to use a 6.0 and LS-3 heads is my plans.
Stainless Works LS header for stock steering box

IMPALA MAN 04-15-2013 02:21 PM
I know Dynatech has been working hard to determine fitment and the document in the link below holds the latest information. If you have questions you can call them and they will try to help.

http://afabcorp.com/Dynatech/lit/Dynatech_LSXCamaro.pdf

jeremy30thz 04-15-2013 03:33 PM
Quote:
Originally Posted by NvrDun71 (Post 474825)
Stainless Works LS header for stock steering box
X2 Stainless Works fit great

KSBRKTRACER 05-24-2013 11:13 AM
Quote:
Originally Posted by NvrDun71 (Post 474825)
Stainless Works LS header for stock steering box
Any Idea what mounts are being used with these headers ...?

NvrDun71 05-24-2013 11:24 AM
Quote:
Originally Posted by KSBRKTRACER (Post 482218)
Any Idea what mounts are being used with these headers ...?
The DSE non-setback motor mount kit works great, with Mast pan, and SW headers.

KSBRKTRACER 05-24-2013 11:27 AM
Quote:
Originally Posted by NvrDun71 (Post 482221)
The DSE motor mount kit non setback kit works great, with Mast pan, and SW headers
I was just looking at the Stainless Works page trying to determine

Throw another question out there then ..... How about in a Turbo application ....Headers that is ...!

jeremy30thz 05-24-2013 09:28 PM
Quote:
Originally Posted by KSBRKTRACER (Post 482218)
Any Idea what mounts are being used with these headers ...?
Transdapt 1" setback plates part# 4575 on the Z28 frame stands. I have sold at least 10 sets of the Stainless Works headers for this application and have never had a issue with fitmeant. If you need headers PM me


All times are GMT -7. The time now is 05:08 AM.
Page 3 of 3 12 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net