Thanks Tones and Scott! We'll keep the updates coming.

Thanks Steve! Hope to meet you as well. PM me a link or when you know the schedule. That sounds like a good time to me.

Ed the rear looks great. I like the double shear for the lower shock mounts

Well I'm living up to my screen name. It takes a special person to turn a couple weekend project into a couple months! :rofl:

Got the Fab9/TrueTrac assembled, the G-link mostly done, and started on the rear brakes. Next I need to clean up my old brake lines and run new fuel lines. I'm also considering building my own 3" stainless exhaust. After all of that I'll remove everything then clean up and re-paint the spots of bare metal.

We're also looking into going EFI. So let me know if you have any suggestions on places to research our options. I've been looking at Holley and Fast's websites and read a couple threads on chevytalk and chevelles forums.

http://i923.photobucket.com/albums/a...IMG_5995-1.jpg

http://i923.photobucket.com/albums/a...o/IMG_5994.jpg

http://i923.photobucket.com/albums/a...IMG_5999-1.jpg

http://i923.photobucket.com/albums/a...IMG_5990-1.jpg

It looks good under there. I like the arms he uses for his four link. Really stout, they look like they could take a beating.

Finally stopped working for long enough to get some things done on the car again. Changed out the master cylinder, ran new front brake lines, and installed the front disc brakes. Since I need to run new rear brake lines I decided I better get the exhaust built/installed as well. I bought 3" Magnaflow mufflers and x pipe and then built the rest with sanitary stainless pipe and pre-formed fittings. I've been wanting to learn how to tig stainless and figured this would be a good project since its mostly hidden. :D I found out that the welding was easy compared to measuring and fitting everything. It took a bit of cursing and a few beers but I got it done.

Master before. It was a little messy
http://i923.photobucket.com/albums/a...o/IMG_6291.jpg

Master after
http://i923.photobucket.com/albums/a...G_0021copy.jpg

Exhaust after welding
http://i923.photobucket.com/albums/a.../IMG_67182.jpg

After hitting the welds with an ss wire wheel
http://i923.photobucket.com/albums/a...o/IMG_0003.jpg

http://i923.photobucket.com/albums/a...G_0006copy.jpg

http://i923.photobucket.com/albums/a...o/IMG_0018.jpg

I’ll post up pics of it installed later this week. I may try taking 2.5” up over the axle and dump behind the wheels. But before then I need to get her driving again. Next up is finishing up the rear brakes.

Nice updates Ed. Great job on the exhaust.

The exhaust looks great, nice work.

Great work! exhaust came out really nice :thumbsup:

Thanks guys! :cheers:

Here's a few pics from tonight. I mounted the exhaust under the car again and just need to make up some hangers now. I also got my rear brake line most of the way done but it's nothing picture worthy.

http://i923.photobucket.com/albums/a.../IMG_67432.jpg

http://i923.photobucket.com/albums/a.../IMG_67542.jpg

http://i923.photobucket.com/albums/a.../IMG_67492.jpg