We've made some good progress the past few weeks. The rear clip is welded in. We Modified the frame connectors to work like DSE ones- they sit nice and tight above the rockers. Brakes, Shock, suspension is all mocked up

http://i250.photobucket.com/albums/g...20COPO/133.jpg

http://i250.photobucket.com/albums/g...20COPO/130.jpg

The engine is in route from Wegner. The dyno sheet put it at 849.2 HP, but the cool part is it made over 700ft. from 3500-6200rpm's!! peaking at 4400 at 797! WOW!

Looks good Chris, I'm curious to see install pics of that rear clip. Do you have any?

I will get some good pics when it goes back on the rack. Removing the rails was tricky not to swiss-cheese the floor. AME recommends leaving that small strip and just trim the rails up to the floor

FedEx showed up today!!
 

With a Wegner Motorsports 416 LS
http://i250.photobucket.com/albums/g...72633198_n.jpg

It made an honest 849.2 HP but the cool part is it made over 700 ft lbs of from 3500-6200! Peaking just under 800 at 4800.

http://i250.photobucket.com/albums/g...14959218_n.jpg
We couldn't wait to get it mocked up.

http://i250.photobucket.com/albums/g...22866404_n.jpg
Here's a glance of 3 of the LS projects going together right now.

crazy low end power these things are making. Ours made a tad more, but in all fairness I think Casey only heard "break it" and not "break it in":lol: Are you leaving the gas pedal out? Your not gonna need it:_paranoid

did they dyno it with the 105mm tb?

Wow...another really nice build coming. :woot: :woot:

Great work you are doing..

Mike V:cheers:

Another great project can't wait to see this one finished.

ps my motor is heading to Wegner in about 3 weeks

That an awesome car to start with. I love their motors amazing power.
subscribed

Cool projects goin on Chris! congrats :cheers:

Good stuff right there. Nice build Chris.