Lateral-g Forums - JCG Kuwait 1969 Camaro Build

Page 3 of 26

Last »

Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)

- - JCG Kuwait 1969 Camaro Build (https://www.lateral-g.net/forums/showthread.php?t=34303)

Spiffav8

11-15-2011 05:45 PM

Quote:

Originally Posted by Gonzo (Post 378824)

This will be the color of the car..

Ferrari Griggio Silverstone
http://i1015.photobucket.com/albums/...JCG69test2.jpg

Cris that thing is absolutely sick!

:thumbsup: :thumbsup:

Cris@JCG

11-15-2011 05:46 PM

Not bad for another daily driver! Huh!

Quote:

Originally Posted by Ron in SoCal (Post 378833)

^ Nice color Cris! :thumbsup: Oh, and the motor's not too shabby either...:D

If I let you drive this one.. you will have to hand over the keys to yours

Quote:

Originally Posted by Vegas69 (Post 378837)

Nice!:thumbsup: Let me know when it's ready for a shake down run. :unibrow:

Can be done! But requires more work...

Quote:

Originally Posted by randy (Post 378842)

god i want my car tucked like that but its a 67.

Tony- It is our goal on the ride height.. 20x12 on 345-30-20 for the rear & 19x10 295-35-19 if they have it for the front..

Quote:

Originally Posted by tones2SS (Post 378846)

Man that thing is going to be a beast! I'm digging it.
Will that be the ride stance that is shown in the rendering Cris? Looks killer!

Cris@JCG

11-15-2011 05:54 PM

Thanks Curtis! The owner asked for an estimate to re-build his 69 with upgraded suspension, LS supercharged, 6 speed, & etc.. When I gave him the estimate.. he asked for a rendering that would get him the warm fuzzy feeling on spending that kinda money.. I have always wanted to work with Carter Hickman & always liked the realistic veiws of his 69 renderings.. so I got my project approved today thanks to Carter's Rendering.. Motor approved & ordering the rest in the next few weeks...

Quote:

Originally Posted by Spiffav8 (Post 378849)

Cris that thing is absolutely sick!

:thumbsup: :thumbsup:

g356gear

11-15-2011 07:10 PM

Quote:

Originally Posted by Gonzo (Post 378823)

Just got our engine on order!

Mast Motorsports

LS7 427 HO S/C 2300 TVS 800HP

Type: LS7 7.0L TVS 2300
Displacement: 427 Cubic Inches
Compression Ratio: 9.5:1
Bore x Stroke: 4.125 x 4.000
Rev Limit: 7000 RPM
Crank: Callies Forged
Rods: Callies H-Beam
Pistons: Mahle Motorsports
Cam: Mast Custom 3-Bolt Core Cam
Heads: Mast CNC LS3/L92 Heads
Intake: Intercooled Supercharger
Valve Springs: Mast Nitrided Beehive

http://www.mastmotorsports.com/2010/photos/117-311.jpg

Sweet motor! Whats the turnaround time for a motor from Mast?

Cris@JCG

11-16-2011 07:06 PM

I think about 4 weeks!

Quote:

Originally Posted by g356gear (Post 378870)

Sweet motor! Whats the turnaround time for a motor from Mast?

Ricochet

11-16-2011 07:29 PM

Looks awesome Chris!! You realize you already set the bar for what you did on the 68. Look forward to seeing this one come together! No doubt it will be a killer!

72Z/28

11-17-2011 09:19 AM

Gonzo this is an awesome rendering really like the color and the stance. This is going to be exciting to watch. I am from Qatar,not far away from Kuwait. I wish I could afford sending my camaro to get it properly built :D

Cris@JCG

11-17-2011 03:06 PM

Here is my version of what I would like the car built to on the colors & trim..
Carter hit it dead on the nail for me!

The owner will be looking @ having trim & bumpers in original finishes... The stripes will be silver with matching centers on the wheels...

http://i1015.photobucket.com/albums/...nalcomp_s2.jpg

Cris@JCG

11-17-2011 03:16 PM

Brent- Thank you sir! I have few new ideas on the engine compartment for this one.. I am very excited about this build.. Mast LS7 supercharged! I luv these engines... If all goes well.. I should have a LS7 for my 70 Z by next week..

Quote:

Originally Posted by Ricochet (Post 379093)

Looks awesome Chris!! You realize you already set the bar for what you did on the 68. Look forward to seeing this one come together! No doubt it will be a killer!

We got 2 builds going on here @ the shop from Kuwait.. & got a more in the works for the future...

Quote:

Originally Posted by 72Z/28 (Post 379172)

tones2SS

11-17-2011 05:25 PM

Looks great. Looking forward to JCG working their magic once again.
Love the black window trim which goes killer with that paint scheme. Keep us posted Cris.:thumbsup:

All times are GMT -7. The time now is 09:26 PM.

Page 3 of 26

Last »

Show 40 post(s) from this thread on one page