| 67ragtp |
10-18-2012 04:36 AM |
Quote:
Originally Posted by Matt.A
(Post 441610)
My advice, run an 18x9 with 6.125" backspace. If you want the car to sit low that will help minimize the amount of times the tire hits the control arms. You are only going to lose maybe a 1 or 2 tenths of an inch of tread width by going with a 9" wheel over a 9.5" wheel.
Matt
|
Im Rich, and "I approve this message", My 69 also has a DSE clip ordered my forgeline zx3p's with 6.125 offset 18x 10 275 toyo 888 not nearly as low as Matts car, turn the wheel to lock just barely touched the frame and both inner fenders around the tops. Install stainless button head screw all around the inner fender. Nightmare, back to forgeline for a rehoop, outer wheel shell 1 inch smaller making the overall 18x9 and its perfect, and I could drop the front more if I want. It doesn't really look like it sucked the wheel in to the wheel house, clearing the fender is the biggest problem.
Rich |
