|
1 Attachment(s)
55" hub to hub. Rotor/hubs/calipers should be out of harms way with 6" back space.
|
1 Attachment(s)
It's been a slow go but I finally have an entire, properly machined, clean finished set of wheels as of February 2014. I have installed the True Turn system and made a quick test trip on the front wheels. Man I love this set up. Amazing difference in handling. I'm still working on the 9" floater. I have it mocked up on make shift stands so I can emulate the car at ride height. Working on making my lower links thanks to Ballistic Fabrication and Spohn Performance. Also making a air/hydraulic tubing bender to make my own version of a Watts link and torque arm suspension. I'll be updating now more often. Lol.
David |
1 Attachment(s)
I hate IPads.
|
1 Attachment(s)
One pic at a time.
|
1 Attachment(s)
And another.
|
1 Attachment(s)
The rear.
|
1 Attachment(s)
Nodular case/locker/ and gear set from Rousch Yates.
|
1 Attachment(s)
Couple more.
|
1 Attachment(s)
And ......
|
1 Attachment(s)
One more.
|
| All times are GMT -7. The time now is 04:06 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net