I finished the bodywork in the engine compartment and sprayed a couple coats of SPI black epoxy. Next day I sprayed SPI Turbo urethane primer.

http://img.photobucket.com/albums/v3...psvbukwczd.jpg

http://img.photobucket.com/albums/v3...psynjyxleg.jpg

http://img.photobucket.com/albums/v3...psxprqkq7d.jpg

http://img.photobucket.com/albums/v3...psz8ol78kz.jpg

http://img.photobucket.com/albums/v3...psgqowloih.jpg

I started working on my II again. I painted the back side of the doors

http://img.photobucket.com/albums/v3...psn35oer2r.jpg

Two coats of SPI white epoxy. A little wet sanding and this weekend it will be SPI Orange

http://img.photobucket.com/albums/v3...ps46zg9zyn.jpg

Three coats SPI Orange and three coats of SPI Universal clear.

http://img.photobucket.com/albums/v3...pscrbnrbtx.jpg

I had not planned on putting the Mustang II on a rotisserie but the more I thought about it I could not just leave the undercarriage looking like this. Brian and I (mostly Brian) fit it on the rotisserie yesterday.

http://img.photobucket.com/albums/v3...ps6egxsw0l.jpg

http://img.photobucket.com/albums/v3...pspooh1nj2.jpg

Yesterday I sprayed 3 coats of SPI orange waiting 45 min between coats and today I sprayed 3 coats of SPI Universal clear waiting 30 min between coats.

http://img.photobucket.com/albums/v3...psbz5r4meh.jpg

http://img.photobucket.com/albums/v3...psfbiggqk7.jpg

You're going all out on this Mustang II, Rusty. It's going to be great when finished. I was at the Coker Tire show last weekend. There was a King Cobra present. Looked great. I can't remember the last time I saw one of those in person.

The seats came in today from Mustangs Unlimited still waiting for the seat tracks

http://img.photobucket.com/albums/v3...psoi6k1x0w.jpg

Last weekend I decided it was time to spray a couple coats of SPI black epoxy on the undercarriage

http://img.photobucket.com/albums/v3...psnilofzvr.jpg

http://img.photobucket.com/albums/v3...pszdorzw3y.jpg

Today I painted the hinges. I know its not a lot of progress but you can't install the doors, hood or rear hatch without them

http://img.photobucket.com/albums/v3...pskrap3irf.jpg

http://img.photobucket.com/albums/v3...ps0u70jzqw.jpg