Lateral-g Forums - Clutch Recommendations

Page 3 of 3

Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Transmission and Rear End (https://www.lateral-g.net/forums/forumdisplay.php?f=39)

- - Clutch Recommendations (https://www.lateral-g.net/forums/showthread.php?t=52537)

Centerforce

04-05-2016 09:28 AM

Quote:

Originally Posted by Zspoiler (Post 634412)

I have run different clutches over time .And the one I have had the most luck with is a Center Force clutch with a steel flywheel.And I run this in my 1979 Z-28 RS Camaro Pro-touring car with a 500 HP plushttp://s1064.photobucket.com Supercharged Small block Chevy.

Is it our Dual-Friction clutch that you are using, or a different model?

SlowProgress

04-28-2016 09:46 PM

Dyad with the GM quick disconnect

Hello guys I started a thread a while back about clutch master connection to the Dyad clutch. I probably should have posted it in a different location. I noticed the centerforce guys are on here so maybe you could take a peak at the link and post up some information on the best way to reuse the GM quick disconnects (GM or DSE style clutch master) with the Ford style release cylinder recommended with the Dyad. It would be greatly appreciated.
The original dead end thread is below. Mods you can move this if I totally missed the mark.

https://lateral-g.net/forums/show...534#post636534

Thanks,

Scott

Zspoiler

04-28-2016 10:06 PM

Its a Centerforce dual friction clutch.And I Heim -jointed my factory clutch likage so its extra smooth.http://s1064.photobucket.com

clill

04-29-2016 09:07 AM

2 Attachment(s)

DYAD setup in Hellfire

SlowProgress

04-30-2016 12:57 PM

Thanks a bunch Charlie. That's a great view of the coupler. I think that is probably how I will try to do it.

Scott

All times are GMT -7. The time now is 08:19 PM.

Page 3 of 3

Show 40 post(s) from this thread on one page