Lateral-g Forums - No flow of water in new LS3

Page 3 of 3

Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- LSX Conversions (https://www.lateral-g.net/forums/forumdisplay.php?f=70)

- - No flow of water in new LS3 (https://www.lateral-g.net/forums/showthread.php?t=52901)

vstol

05-15-2016 03:14 PM

Quote:

Originally Posted by dhutton (Post 637567)

What temperature sensor is your engine controller using? Are you using the GM controller?

Quite often guys use two sensors, one in each head.

Don

gotcha

vstol

05-15-2016 04:08 PM

Well I checked even further about the gauge and on Auto Meter's web site they list the same symptoms I was having to a bad ground. Long story short it is a bad ground. I changed the ground and the gauge stayed at 210 while the water was boiling. Thanks for all your help, I will know tomorrow or so when I crank it back up.

Note to Badazz I run the sensor on the ps side in the rear as well.

http://www.corvetteforum.com/forums/...ica-kinda.html

All times are GMT -7. The time now is 01:03 PM.

Page 3 of 3

Show 40 post(s) from this thread on one page