It's been a while since the last update - ya know how life can get in the way. Lol!

Anyway, the passenger side rail is out and the new one is fitted. It's approaching good-enough, but not quite ready to weld. I want to get the other side in place before breaking out the welder.

https://photos.smugmug.com/Cars/Fire..._162302-XL.jpg
https://photos.smugmug.com/Cars/Fire..._162053-XL.jpg

Trying to get this project back on track!
CR

Looking good...
 

While the rails are still out you might want to continue to remove all the old material gunk/paint while you still have access around those areas and then spray weld thru primer back over the bare metal. It will make you life a lot easier later on.
Little by little you will get there.

:superhack: :welder: :whenitsdone: :flag2: