Lateral-g Forums - Nu Relic power window issue

Page 3 of 3

Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Interior and Electrical (https://www.lateral-g.net/forums/forumdisplay.php?f=40)

- - Nu Relic power window issue (https://www.lateral-g.net/forums/showthread.php?t=59095)

dhutton

06-16-2021 09:34 AM

Quote:

Originally Posted by colorado80439 (Post 713309)

I ended up using this resistor
https://www.mouser.com/ProductDetail/284-HS3001RJ
And this diode
https://www.digikey.com/en/products/...4S1-D3/5068422

They both qualified for the parameters we were looking for and the packaging was convenient for mounting.

The front windows now work at the same speed up and down.

Thanks again for all the awesome assistance

Those are some serious parts. You know what they say. Go big or go home…. :)

Don

XLexusTech

06-17-2021 05:02 AM

Quote:

Originally Posted by colorado80439 (Post 713309)

Nice. any chance you can put up a quick draw of how its wired? Which feed which side of switch ect..

colorado80439

06-17-2021 05:27 AM

Sure I can verbalize it easier than a drawing, but the switch has 2 wires to the window regulator motor. One up and one down, the resistor is put in series with the power down wire and the diode is in parallel with the resistor. I had to play with the diode direction to get it correct.
Thanks

All times are GMT -7. The time now is 01:14 PM.

Page 3 of 3

Show 40 post(s) from this thread on one page