Lateral-g Forums
Page 3 of 3 12 3
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Open Discussion (https://www.lateral-g.net/forums/forumdisplay.php?f=14)
-   -   Ultimate headers for Roadster Shop chassis (https://www.lateral-g.net/forums/showthread.php?t=59626)

Blown353 09-12-2022 08:12 AM
Quote:
Originally Posted by camcojb (Post 720169)
Did you get the 2" tubes? The stock GM starter clears easily.
No, 1-7/8". I didn't even know they offered 2" tubes for their stock chassis A body LS swap application, and they didn't mention it on the phone when I ordered.

Don't think I'll have any starter clearance issues with mine though, the tube routing for the stock chassis header on the passenger side is quite a bit different from the headers in your pics for the RS chassis application.

camcojb 09-12-2022 10:02 AM
Quote:
Originally Posted by Blown353 (Post 720196)
No, 1-7/8". I didn't even know they offered 2" tubes for their stock chassis A body LS swap application, and they didn't mention it on the phone when I ordered.

Don't think I'll have any starter clearance issues with mine though, the tube routing for the stock chassis header on the passenger side is quite a bit different from the headers in your pics for the RS chassis application.
These headers are for the RS chassis.

sn75 09-16-2022 03:29 PM
2 Attachment(s)
Headers fit great with stock LS starter. Can’t wait to get my RS Chassis and really start putting this project together. Thank you Jody for letting me put my engine in your RS chassis to test fit and look for any potential snafu’s. :thumbsup:


All times are GMT -7. The time now is 10:39 PM.
Page 3 of 3 12 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net