Beyond? Maybe I'm not being clear. All three of the suspension choices on your short list will more than likely exceed the performance requirements of your application. I say "more than likely" because I'm not exactly sure what your requirements are. Do you have a car already? Is your project in process? Assuming that I'm right, there's not much need for beyond. There should be a fading echo here. BEYOND.....Beyond......beyond....beyo...

Say I'm right: Any of these choices will meet or exceed your performance goals. Then it makes sense to pay some attention to secondary features such as how the Lateral Dynamics crossmembers and pre-welded rear end housing will greatly simplify your installation. They could have easily tossed a puzzle of tubing and tabs in a box and cut the price. Instead, the company went the extra mile to make sure that you don't unnecessarily waste any brain cells during the installation process. And brain cells are hard to come by or replace. So the crossmember design is worth it's weight in gold. Which, in turn, bolsters the product's "bang for the buck" quotient.

Having purchased--quite literally--one of the world's first aftermarket subframes 8 years ago and then spending about one million dollars "fixing" it, I assure you that these secondary considerations are important. They are way more important that "1.00g vs .89g.

Steve:

Your comments are well taken and I really appreciate everyones response regarding this.

Based on the answers, I know I'm in the right place for good information. I plan ti build only one more 69 Camaro, and I would like to do it as a pefect car for me, my use and driving skill. I do intend on spending a fair amount of money really learning to drive effectively so all these great items can be appreciated.

It's just that at this point it is so important what you put under everything as a foundation and i really want to start on the right foot.

I had hired someone to build this part of my project, but I'm not sure this will happen. I'm trying to take advantage of this delay to better inform myself, thus hopefully building a better car.

God I loved my last 69 and I just sold my harley. I'm ready to start this project soon hopefully ding it right the first hand. (I have several other car I want to go through after this one is finished.

My '33 Ford 5 Window should be up and going in the next few months, then the 69 Camaro, Then redue a pristine '65 Riviera that would make a perfect Stock example of it's type. (Blk on Blk, with a 425 Nailhead) Its really fun to take out but it needs some TLC which will come when I get my, "Track", '69 Camaro rolling.

I really want to put a lot of seat time in it.

Anymore thoughts are always welcome and appreciated.

Thanks again,

tyoneal

I hope their product will be a friendly installation into a Camaro with having to do a lot f extra metal work.

Does anyone know about this??

Thanks,

Ty

Good morning Ty,
Let's have some fun. Please elaborate on "Track". What type of tracks? Are there specific venues and or events in mind? Given that you have other toys, you might be able to make your Camaro more focused. I, likewise, have a comfy, bone stock 1965 Riviera. Black on Black on Black. The Riv allowed me to do a more aggressive build on my Camaro.

If you don't mind, Please guestimate at the percentages of application if possible as follows:
Street/Touring: %
Drag: %
RoadRace/Auto-X: %

Would you be open to publicly answering a more thorough survey so that others might benefit from your decision process. In addition to the above questions. Questions would be like this: Are you afraid of paint chips? Will you be performing your own fabrication? ...That kind of stuff.

Ty- This is a new part. The pic is from our 2007 catalog shoot, that I e-mailed to Steve.

Good morning Ty,

Let's have some fun. Please elaborate on "Track". What type of tracks? Are there specific venues and or events in mind? Given that you have other toys, you might be able to make your Camaro more focused. I, likewise, have a comfy, bone stock 1965 Riviera. Black on Black on Black. The Riv allowed me to do a more aggressive build on my Camaro.

If you don't mind, Please guestimate at the percentages of application if possible as follows: (See Below)

Would you be open to publicly answering a more thorough survey so that others might benefit from your decision process? Absolutely :thumbsup:

In addition to the above questions. Questions would be like this: Are you afraid of paint chips? Will you be performing your own fabrication? ...That kind of stuff. I'm Open! :thumbsup:

If you don't mind, Please guestimate at the percentages of application if possible as follows:

Street/Touring %: up to 50% or (What I can get my wife to put up with, or the purpose of the trip) I would like to make the Power Tour one of these days. Living in Texas I won't have a Car without a/c!! I know when first acquired or running, I'll have my Butt in it every chance I can. That said, I think it would depend how I feel or what I feel like driving. I DO WANT TO BE ABLE TO MAKE THE POWER TOUR WITH DEPENDABILITY! I've read so much about it, I think it would be a blast. I'm not keen on doing a lot of street racing because of the risk to everyone and myself. So street racing if done at all would be up to the speed limit or slightly past and that's it, just to watch my occuments grin. Most people I know have never really been in a fast car.

Drag: % 5-10% (Mostly to reminice about my High School Days and for fun or dialing in the car) I usually go with my wife to just watch as she is a big fan. (She loves how the top fuel make the stadium seats rumble, and that's ALL I'm going to say about that. Plus the drivers are really nice to meet and speak with) Our nearest good Drag Strip is South of Dallas (in Ennis, TX) about 30-40 miles, and I live 20 miles North of Dallas, and probably the Powder Tour Drag Stuff?

RoadRace/Auto-X: % as much as possible, realistically probably 20-40% depending on distance to the course. Also, I have a car trailor so if I had the front end dialed in for the track, I wouldn't have to drive 200 miles round trip on expensive tires for the hell of it, plus I'm positive I will have some people will want to come with me from time to time. Plus if I break the car or God Forbid have a mishap, I can get home. So % of time on the track I'm not exactly how to answer that because actual milage on the car won't necessarily include driving to and from it.

Training %- Not sure but throw that in with track time.

I'm about 40 miles due east of the Texas Motor Speedway and I think they give lessons and have a inside closed course for us Amatuers. There is a Strong SCCA Group in the DFW area as well as a strong Local Camaro club.

Will you be performing your own fabrication? At this point I can't answer that question accurately because I just had my second shoulder replacement, and I don't know what I'm going to get back as far as strength, motion etc. For discussion sake let's assume very little. Also, at this point I'm still waiting to see if a Manual 6 speed is in my future, or a Schrifter with a 6L80e.

Paint Chips? - Well they always suck, but you going to get them if your going to drive the darn thing, and if I'm not going to Drive it, I'll just go to a car show and look at everyone else's. A buddy of mine put something on his car called I think, an invisible Bra. He swears it works and he drives the hell out of his car. It's one of those new Chevy Trucks that doesn't really haul anything and has a LS-2 in it . He put on a Supercharger and a 20k paint job. He put one of these Bra type things that go on top of the paint and his car looks really good still.

When they had that meet this last year up in Detroit he drove to it and there is a small picture of his car in HOTROD magazine. His name is Mike Fox (No Relation) and his car looks like it ran through and American Flag and kept on going. (There are tears and rips and stuff in the rippling flag) It's pretty impressive. I told him now to be proper since the flag is torn and worn, he needs to burn it. He didn't smile, but thats another story.

Anyway,

Does this help?

I certainly don't mind answering these questions publicly, I really appreciate having the advice of you all on this board.

I await you comments.............

Ty O'Neal

Thanks. That already helps alot. But I'll keep coming up with questions. For now, know that the number one hardest part of building a hot rod is outsourcing labor--usually fabrication and paint. If you will not be doing your own fabrication, you need to find someone you can trust and be prepared to carry the expense. A good fabricator can easily cost $2K to $4K per week. And bad fabricators should not be allowed near your car regardless of price.

Unless you have deep pockets and--more importantly--a fabricator that you trust absolutely, ease of installation and cost of installation should be considered top priorities. Furthermore, radical modifications might not be necessary for what sounds like a street car. You responses to the racing questions sound more like good intentions rather than specific plans. Had you stated, for example, that "you are an SCCA member and you already auto-X the wife's Jetta on a regular basis", I would have a different impression. Your response applies to most of us. Without driver training and experience, I assure you that all of these suspension systems will exceed YOUR capablilities.

Mind you, none of this means that you shouldn't score the latest hardcore parts. It just means that the decision making process should be less intense. Choose parts because you want them--not because you are trying to achieve a specific performance goal. Don't sweat minute performance differences. What you CAN'T do, is choose parts and systems that might prevent or delay project completion.

Let's come up with more questions to try and zero in on suspension systems for your car. These are all questions that I either asked myself or should have asked.

-Would you sacrifice ultimate grip in the name of ride quality?
-Would you push your car to the limit if that meant high risk of an off track experience?
-Do you already have a trustworthy fabricator secured?
-What is his hourly rate?
-What information is your trust based on?
-Where will you be storing and working on your car?
-How important is interior creature comforts other than AC?
-How concerned are you with vehicle ride height? (Do you need your car to be the lowest around, or do you prefer reasonable ground clearance)
-How many hot rod projects have you completed?
-How many hot rod projects have you been actively involved with? (i.e. wrenching on friends' cars, helping them choose parts, driving friends' cars)

Steve:


On Jan 2, 2007, at 1:12 PM, Ty O'Neal wrote:

Steve:

Let me take a stab at these, and BTW thanks for getting back quickly.

Unless you have deep pockets and--more importantly--a fabricator that you trust absolutely, ease of installation and cost of installation should be considered top priorities.
-My plan to cover this is to:
a) Purchase a car or roller that has been done correctly, or
b) Buy a car and have one of the vendors do the metal work and suspension installation, or
c) Look for some ones, "Mule", that has been sorted out then work on it from there

These are my favorites so far because, I think I'm in touch now with a professional group of experienced folks. I intend for this to be a 18 to 24 month build. (Probably more) So doing it right is more important than doing it quickly.

I will require metal fabrication on:
a) Mini-Tubs
b) Roll Cage
c) Subframe Connectors if a full frame is not used
d) Anything else that needs replacement due to rust or damage
e) Potential Suspension work depending on the type or style used
f) Exhaust

Furthermore, radical modifications might not be necessary for what sounds like a street car. Your responses to the racing questions sound more like good intentions rather than specific plans.

I have owned my own business for about twenty years now and it has taken basically ALL my extra time. (Commercial Real Estate) At this point it is self sustaining and I am semi-retired. Due to a car wreck two years ago, I have scaled back most of these responsibilities to heal and re evaluate my life. (Encouraged by my Doctor and wife also)

The Second reason I am not a member now is, Instead of SCCA membership, I have been on the:

Downtown Planning and Zoning overlay Counsil
The City Millinium Plan Counsil
President of the Downtown Merchants Association (5 years)
Board Member of the Plano, Texas Symphony (3 Years)
Advisory Committee to the Plano, Symphony
Inner circle member of the Dallas Opera
Host for a weekly contact lunchen for North Texas Mensa (15 Years)
Member of the Hertatige Association of Frisco
I've had to regularly attend City Counsil Meetings
I'm two classes, my comps, and my disertation away from a Ph.d in Communications Technology
North Texas Harley Association
Member IDPA and president of local chapter. (Went to National twice and placed in the top five in my class once) IDPA= Action Pistol Shooting. Normally shot matches in a 5 state area each year
Member of USPSA= another Action pistol shooting group
Plus have tried to squeeze in some time for my wife. (Not necessarily in this order) ;-)

Hopefully, this will give you an idea what I have been up to.

THE #1 REASON NO SCCA YET. If I got involved I'd want a trick car, lots of tires, lessons and so on and I wouldn't have had the money to go back into my business for the last 20 years. For me Auto Racing, Car Collecting and generally just screwing around with Cars is expensive, and I've put that part of my life on hold because of this.

Had you stated, for example, that "you are an SCCA member and you already auto-X the wife's Jetta on a regular basis", I would have a different impression. Your response applies to most of us. Without driver training and experience, I assure you that all of these suspension systems will exceed YOUR capablilities.

That I have no doubt, however, if I'm going to spend $10k to $20k on a suspension, I'd like to be as informed as possible.

Mind you, none of this means that you shouldn't score the latest hardcore parts. It just means that the decision making process should be less intense.

It's difficult for me to NOT be intense. I really enjoy learning especially on a subject I have loved since I was born.

Choose parts because you want them--not because you are trying to achieve a specific performance goal. Don't sweat minute performance differences. What you CAN'T do, is choose parts and systems that might prevent or delay project completion.

If I think I want two left front rotors on my brake system, I'd like to avoid some obvious mistakes that have to be redone. A while back the last 69 Camaro I really built was in 1980. Straight line speed was ok, cornering sucked. That has spured many of the questions.

Let's come up with more questions to try and zero in on suspension systems for your car. These are all questions that I either asked myself or should have asked.

-Would you sacrifice ultimate grip in the name of ride quality? No, a combination of both would be desired, however a killer street handeling Car, and a good handeling Track car, if possible, would be a good goal.

-Would you push your car to the limit if that meant high risk of an off track experience? Not intentionally, heck I'm just getting over a car wreck now. How is this, "As fast as Possible, without taking undue risk". If someone passes me, it's not the end of the world. The Idea is to have, "Fun".

-Do you already have a trustworthy fabricator secured? Not as yet, I know someone personally, but he is already finishing my '33 Ford 5 Window and has several projects behind it. It will have a built 429 with a C6 and a 9 inch with 4:11 gears.

-What is his hourly rate? $60/hr

-What information is your trust based on? He has built over 50 car (Frame up) Held World Speed Record at Bonniville, in "D" Street Roadster, and was Mobil Oil Corporations Head Honcho for All the Motorsports they sponcered. He was their main man understanding the current and future racing technology so they could formulate lubricants for those applications.

Now that being said, he has projects up to his teeth now, so I was going to start Talking to the people who sponser this site, with ideas, products and cost.


-Where will you be storing and working on your car? I have a storage building I use to house farm equipment and various other items.

-How important is interior creature comforts other than AC? XM Radio and good seats primarily

-How concerned are you with vehicle ride height? Adjustability would be very nice. Real high, real low, No interest!

-How many hot rod projects have you completed? Two alone. 67 Camaro and a 69 Camaro

-How many hot rod projects have you been actively involved with? No Idea, Dozens. I was part of the crew at Bonniville in addition to wrenching on Cars, Trucks Motorcycles etc.

How is this information? Does it help?

Thanks again for your time.

Ty O'Neal

Most benchracing sessions swirl around two polarized views: Street or race. Based on your responses, let me try to sum things up in one important statement that very few people consider.

If you race your car, you will most likely race it in street trim.

That's a powerful statement. Most folks are like: "....Well I'm gonna track my car, so I need the double throw-down parts and set up." Wrong. More than likely, you will want to see how the car performs on the track in street trim. After a few attempts, you will probably realize that the car performs very well, so why mess with it. End of story: Street car on the track.

Does that sound right? Does that sound like you? If 50% of your driving will be street/touring, then there is no sense in building a car on slicks with 3 degrees of static camber and a bunch of toe out. File that one under "duh". At the track, you will probably take advantage of simple adjustments such as turns of the shock knobs or maybe link rod changes. If you get fancy, you might swap a splined sway bar. You will more than likely not bother to swap wheels & tires or coil springs. As you have described it, Never forget that your project is a street car! Staying focused on that concept will help you complete your project. You will most likely never explore the limits of your top three suspension choices. And if you do--you might crash!

If you have access to a top notch fabricator, then the only limiting factor to your selection is budget and time. In my neck of the woods, your extensive list of fabrication tasks could easily consume $30K-$40K. So again, any of those three suspension choices will work for you.. Just get estimates for installing all three variations.

Visit my website and call the phone number listed there if you would like to discuss the matter further. And the offer is still open: Fly to NY and take a drive in a variety of cars. The test drives will reinforce my statements.

James:

How have your choices paned out so far?

What type of shocks and springs did you decide to use, and what settings (Where applicable) have worked the best for Street or Track applications.

What wheels, tires and brakes did you go with?

Any hindsight you can share on your total experience?

Thanks,

tyoneal