Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Open Discussion (https://www.lateral-g.net/forums/forumdisplay.php?f=14)
-   -   Build Pics of Nre's TT LSx's (https://www.lateral-g.net/forums/showthread.php?t=21918)

TOM NELSON 11-21-2009 11:03 AM

Whats new
 
Quote:

Originally Posted by Bowtieracing (Post 248901)
Anything new on the build up and intake?

we have finished the final article on the casting and it is being tooled for machining should be around 3 to 4 weeks and i will post more

TOM NELSON 11-21-2009 11:04 AM

Cost
 
Quote:

Originally Posted by XTRMEASURES (Post 249268)
i love it, what something like that cost?

keep the pics comming........:thumbsup: :hail:

Cost is yet to be determined but it i think many will be pleased with what i will be able to sell it for.

TOM NELSON 11-21-2009 11:08 AM

Quote:

Originally Posted by T_Raven (Post 249287)
Just read through this thread. Really nice stuff.

I was wondering what rags you use to wipe down the cylinders. I went to Wyotech and they taught us to use ATF with "lint free" white rags but I don't know what kind of rags they were or where to get them.

I usually use a brawny white paper towel that way i can see when the cylinder wall is clean we use laquer thinner to clean them multiple rags per cylinder with heavy presure from your fingers .I don't use atf anymore we used to do that i use 30weight mineral based now

Junkie 11-21-2009 12:38 PM

I'll be calling you guys to price some stuff out this coming week :thumbsup:

XTRMEASURES 12-07-2009 12:54 PM

.....bump.....

Bowtieracing 01-08-2010 05:25 AM

Quote:

Originally Posted by TOM NELSON (Post 249349)
we have finished the final article on the casting and it is being tooled for machining should be around 3 to 4 weeks and i will post more


Was there talk about OHC heads ??:_paranoid

Diognes56 01-08-2010 06:36 AM

:bow: :bow: :bow:

David

EddDeeEye 01-08-2010 07:54 AM

That intake is killer! Thanks so much for sharing the level of work that goes into building one of your masterpieces! :bow:

Bowtieracing 02-13-2013 09:18 AM

Quote:

Originally Posted by TOM NELSON (Post 249349)
we have finished the final article on the casting and it is being tooled for machining should be around 3 to 4 weeks and i will post more

Anything?

camcojb 02-13-2013 09:27 AM

He has not posted here in almost three years and his pictures no longer show up.


All times are GMT -7. The time now is 03:25 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net