Lateral-g Forums - Project Passionately Pink Camaro

Page 3 of 3

Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)

- - Project Passionately Pink Camaro (https://www.lateral-g.net/forums/showthread.php?t=31968)

Apogee

10-19-2011 11:05 AM

Woo-hoo! New parts. It's looking good. You should be receiving some 1-piece Hawk HP Plus pads for OUSCI shortly. Thanks again for the opportunity to participate in this project and provide the brakes for a great cause. I can't wait to see it at SEMA (booth #11749 in the North Hall).

Tobin
KORE3

Apogee

10-19-2011 11:13 AM

Quote:

Originally Posted by ProTour72 (Post 366776)

Check out their website. www.passionatelypinkcamaro.com, a company named "Monzter Motorsports" built the tail lights, and the circuit board tail lights are Digi-tails, this car is coming along well, cant wait to see what else is cooking, I know Monzter is doing alot of the one-off billet work for the Passionately Pink Camaro,like billet grille, and a billet belt drive, along with Ring Brothers hindges, Marquez strikers door vents, door panels, and rear deck panel. Cant wait to see it at Sema!!

Many thanks as well to Monzter Motorsports for the engraving work on the calipers. They came through in a pinch to give provide some of the details that make the car extra-special.

Tobin
KORE3

Sled Alley

10-21-2011 05:10 AM

Sled Alley Hot Rods

The guys at Victory are doing a great job the car looks amazing in person:thumbsup:

PPinkCamaro

10-21-2011 09:06 AM

These calipers? :)

http://i1107.photobucket.com/albums/...o/DSC09822.jpg

Quote:

Originally Posted by Apogee (Post 374630)

Many thanks as well to Monzter Motorsports for the engraving work on the calipers. They came through in a pinch to give provide some of the details that make the car extra-special.

Tobin
KORE3

ProTour72

10-28-2011 06:03 AM

That looks awesome!! Cant wait to see it at SEMA!

PPinkCamaro

11-01-2011 06:32 AM

Check the car out at booth 24651 in the Central Hall at the SEMA Show.

http://i1107.photobucket.com/albums/...36562416_n.jpg

GrabberGT

11-01-2011 07:52 AM

Somebody PLEASE get over there with a REAL camera and take some decent picks. This car looks awesome. Love the hood.

ProTour72

11-02-2011 10:44 AM

Kinda Sad.

WOW! The car looks great cant wait to see more pics.

On a side note, I am very shocked at how many people didnt comment on this build thread. The car wasunveiled yesterday, and posted here on Lateral G yesterday and one person commented. Kinda sad if you look at it. I guess its not as important as Bill Goldberg building a car, but Id personally like to send a shout out to everyone involved in this build. You guys went over and beyond to build a tribute car for our Mothers, daughters, and friends who battled the rigors of fighting breastcancer. Its people like Victory Racing Engines, National Parts Depot, Classic Industries, and all of the other Passionately Pink Camaro's 69 sponsors that are the true Pioneers of what this country was once made of, and what we lack as a whole today in the modern America.....Integrity..and Heart. Not the all mighty Buck!

Heres to all of these guys..........Thank you!

70rs	11-02-2011 02:09 PM

Quote:

Originally Posted by ProTour72 (Post 376640)

There are alot more ” views” than posts. I know I personally followed the build on three different sites. I only posted replies or comments on this site.
I guess my point is that many, many people watched the build. And I have to believe that anyone who is aware of it believes in the cause.
The builders, sponsors and anyone else involved has done a great job and for a great cause. The car turned out great.

Z06Joe

11-03-2011 05:16 PM

Where is the unveil thread?? I absolutely love this build/project!! It has a lot of meaning to me.

ProTour72

11-04-2011 05:57 AM

pics

GrabberGT

11-04-2011 07:44 AM

Looks awesome. The seats are are a little too retro for me though. Those headlights are pretty trick looking.

Swain

11-04-2011 08:02 AM

Wounder what happened to the steering wheel we donated for this project? :_paranoid

BMR Tech

11-04-2011 08:03 AM

Great job guys! The car looks fantastic!

ProTour72

11-04-2011 09:17 AM

Quote:

Originally Posted by BMR Tech (Post 376828)

Great job guys! The car looks fantastic!

How bout that BMR Torque arm kit in pink? Looks killer!!!

:lateral:

bonecrrusher

11-04-2011 03:01 PM

What color paint is the body?

ProTour72

11-05-2011 01:55 PM

Quote:

Originally Posted by GrabberGT (Post 376825)

Looks awesome. The seats are are a little too retro for me though. Those headlights are pretty trick looking.

The car was built with "newstalsia" in mind the seats are actually Corbeau seats that were shaped to look similar to the old style but with more bolster like a racing seat, but these seat recline and go up and down. Oh yea, and they have seat heaters and messagers front and rear!! :thumbsup:

ProTour72

11-05-2011 01:57 PM

Quote:

Originally Posted by bonecrrusher (Post 376888)

What color paint is the body?

It's the 2011 chevy camaro Cyber Grey Metallic (CGM) really pretty in person!

Z06Joe

11-05-2011 04:58 PM

Love it!!! It really turned out great!!!

PPinkCamaro

11-09-2011 04:39 PM

Cris@JCG

01-20-2012 07:47 AM

I need a little help here guys… I let Andy borrow my wheel simulator back in August of 2011 for his project.. I saw no harm in boxing it up & shipping it out to him so that they could do their wheels..
I have been calling Andy for the last couple of months asking him to send it back because I really need this tool back.. I have been super cool about the whole situation & very patient.. but enough is enough.. It was suppose to be shipped out about two weeks ago & he was suppose to get me a tracking #... Never called me back… Called him this week.. no answer & leaving messages..

I might have not sponsored any parts to the project.. but I let him borrow a very valuable tool to my shop.. It took a lot for me to do this post.. but don’t know what else to do..

I have been asked by various member here to see if they can borrow or rent this tool.. & all I can say is .. First I need to get it back..

Thanks Chris @ JCG for the use of this little gem. Made things a lot easier to measure up our Fikse wheels.

http://i1107.photobucket.com/albums/...o/DSC09649.jpg[/QUOTE]

214Chevy

01-20-2012 09:17 AM

Hot damn!!! I lost track of this thread and oooooh weeeee....this car is amazing. :yes: :yes: Craftsmenship is flawless.:thumbsup: :thumbsup:

GregWeld

01-20-2012 09:24 AM

Quote:

Originally Posted by Gonzo (Post 390760)

I'd have more to say but don't want to get into trouble with the MODS...

HOW SAD THAT A MAN (used lightly) CAN'T KEEP HIS WORD.

214Chevy

01-20-2012 09:30 AM

Quote:

Originally Posted by GregWeld (Post 390778)

....HOW SAD THAT A MAN (used lightly) CAN'T KEEP HIS WORD.

Well stated Greg. I may want to borrow this tool one day and that may be compromised by the actions of another person. If a "MAN" doesn't have nothing else in life, it should be his word. We have a wonderful family here. I was once offered to be loaned some C6 spindles by SoCal Ron. I have never met him personally, but have had several personal phone conversations with him and talk to him about car advice often. Ron offered to loan me his brand new spindles for my project on one condition...that I return them and I gave him my WORD.

KPC67

01-20-2012 09:36 AM

Quote:

Originally Posted by 509Chevelle (Post 390779)

Well stated Greg. I may want to borrow this tool one day and that may be compromised by the actions of another person. If a "MAN" doesn't have nothing else in life, it should be his word.

Quote:

Originally Posted by GregWeld (Post 390778)

I'd have more to say but don't want to get into trouble with the MODS...

HOW SAD THAT A MAN (used lightly) CAN'T KEEP HIS WORD.

I don't really want to get into this either but I feel for you Cris! So here is to hoping this gets resolved, and you get your tool back.
I guess if you are to ever lend it out again a refundable deposit (for what the tool is worth; or maybe even a little more) is in order.

Cris@JCG

02-23-2012 01:55 PM

Just to let you guys know.. I got my wheel simulator back..

cencalc6

02-23-2012 02:22 PM

Quote:

Originally Posted by Gonzo (Post 397310)

Just to let you guys know.. I got my wheel simulator back..

:thumbsup:

214Chevy

02-23-2012 02:30 PM

Quote:

Originally Posted by Gonzo (Post 397310)

Just to let you guys know.. I got my wheel simulator back..

Hip hip hooray!!!!!:woot:

DOOM	02-23-2012 03:49 PM

Cris what ever you do don't borrow that tool to any more knuckle heads!:D

coolwelder62

02-23-2012 05:06 PM

Was it sent back too you Freight Collect (F.O.B.).:willy:

DOOM	02-24-2012 06:53 AM

Quote:

Originally Posted by coolwelder62 (Post 397340)

Was it sent back too you Freight Collect (F.O.B.).:willy:

Cris had the tool sent to me. I was actually going to drive out to Detroit to get it for him. Sad part about it when I opened up the box it was apart missing several of the mounting bolts WTF!!!! Cris is a class act that will help anyone! Its hard to find people like this today!

GregWeld

02-24-2012 07:00 AM

Quote:

Originally Posted by DOOM (Post 397420)

Cris had the tool sent to me. I was actually going to drive out to Detroit to get it for him. Sad part about it when I opened up the box it was apart missing several of the mounting bolts WTF!!!! Cris is a class act that will help anyone! Its hard to find people like this today!

Sadly - it's a whole lot easier to "find" the DB's (like this borrower) that don't hold up their part of the bargain.

INMO -- this ONE SINGLE ACT (not returning the tool when asked) ruined this thread and what the car could have stood for. Because now, whenever I see this car, I see a bad actor rather than the good cause.