Lateral-g Forums - Finch Performance Parts

Page 3 of 3

Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Open Discussion (https://www.lateral-g.net/forums/forumdisplay.php?f=14)

- - Finch Performance Parts (https://www.lateral-g.net/forums/showthread.php?t=44711)

grif54

01-22-2016 09:38 AM

Are you guys still making the shifter bezel? If you are I would like to pick one up. Thanks

randy

04-02-2016 06:56 PM

Quote:

Originally Posted by Finch (Post 589523)

I have the first run of shifters back from anodizing and ready to ship. I have both black and clear anodized angled versions in 6, 8, 10, and 12 inch overall lengths and 8 inch straight version as well.

6 and 8 inch versions are $110 shipped in the lower 48 and the 10 and 12 versions are $120 shipped.

They come with both offset and zero locating slugs for final angle adjustments.

I need to figure out which size shifter to go with 6 or 8" I currently have the 10 and its too high

randy

02-18-2017 02:49 PM

Is it normal for some fuel to mist out of a fuel vent? Im running the Finch performance dual vent system that is mounted in my trunk and after going on for some spirited driving and parking the car you can hear and see fuel mist coming out of the vent. Any idea what it could be? 67 camaro ls3, Ricks notched corner tank with new camaro fuel pump.

FYI we have this system on 2 other cars and experiencing the same thing.

randy

09-04-2017 02:39 PM

Quote:

Originally Posted by Finch (Post 539991)

Just wanted to throw out there that we can also do custom orders on the shift boots if you have a particular color or tye of material. Here is one we just did for a Lat-G member wanting to show off more of his billet shifter. We took 2 inches out the the boot to allow more of the arm to show.

Brian I need another shifter boot only. It needs to be low profile as well. The 6x9 version should got nicely in a stock 2nd gen automatic console since I already have the ring. How much for a low profile 6x9 version and if you have to make 1 I'll take it in orange stitching

jeff71

02-15-2020 08:55 AM

Paging..... Mr. Finch paging Mr. Brian Finch...

Please check your DM, PM, email, text, voicemail... wait that was full, your Ring camera j/k, Instagram comments.....etc

I've been trying to get in touch regarding your parts.

The main question is, what is the inside and outside measurements of the 4x6 steel weld/bolt in shifter boot ring?

If anyone knows how much to get in touch with Finch please forward this to him.

Thanks

130fe

02-15-2020 06:18 PM

Have you tried reaching him on Facebook?

Vegas69

02-15-2020 08:50 PM

If you've tried all of those ways, I'd say let it be.

raustinss

02-16-2020 04:38 AM

He might be in the bathroom

All times are GMT -7. The time now is 11:22 PM.

Page 3 of 3

Show 40 post(s) from this thread on one page