great work on the firewall and under side. Keep it up!

nice work, I just did the raptor on my 70 as well, that stuff is awesome I will have to post on my thread soon , our cars are similar

Well I got the motor and transmission installed. Being that I am going carbureted I did not like the look of the stock valley cover. I really like the look of the billet specialties ribbed one but they do not make them for the ls1/ls6 style valley only for the ls2/ls3 so I had to modify it to make it work. Also I got the brake lines all bent up. I also started making the door panel cards and package tray made so I can take them to get them upholstered without having to take the car while it gets painted. Now I am just waiting on getting my cylinder heads back so I can get them torqued down and assemble the rest of the car to go to paint.

http://i963.photobucket.com/albums/a...psfcvkmss1.jpg

http://i963.photobucket.com/albums/a...psd84ypuzx.jpg

http://i963.photobucket.com/albums/a...psmxes3tiw.jpg

http://i963.photobucket.com/albums/a...ps2wsinych.jpg

http://i963.photobucket.com/albums/a...psgpvblqyq.jpg

http://i963.photobucket.com/albums/a...pstfr3odm1.jpg

http://i963.photobucket.com/albums/a...pstfr3odm1.jpg

http://i963.photobucket.com/albums/a...pszzgabsxs.jpg

http://i963.photobucket.com/albums/a...pstdn6x8rr.jpg

http://i963.photobucket.com/albums/a...psc4bfa4sw.jpg

Valley cover and brake line came out nice. What have you got planned for the door panels?

Everything is looking great!! nice job

Its been awhile since I posted been getting a bunch of the little things done before it goes to paint. Got the cylinder heads back and installed also did the trunion upgrade. Got the inner fenderwells painted and also the radiator support. Got the design all done on the door panels so now all I have to do is get them covered. Now I'm just finishing up a couple of things and it can go off to get painted.

http://i963.photobucket.com/albums/a...psna3960g1.jpg

http://i963.photobucket.com/albums/a...pszi9kwviw.jpg

http://i963.photobucket.com/albums/a...psn8tpt3vt.jpg

http://i963.photobucket.com/albums/a...psfj1qnvwj.jpg

http://i963.photobucket.com/albums/a...psthnljkvz.jpg

http://i963.photobucket.com/albums/a...psqiqe7wal.jpg

http://i963.photobucket.com/albums/a...pslp7pcn6b.jpg

http://i963.photobucket.com/albums/a...psesni57ic.jpg

That thing is looking good Zach!!

How about some pics of the 510 too?

Beautiful job! It looks amazing.

Just went thru the whole thread great job! What color are you going with?

That engine really looks good in there,nice work

Thanks guys and I'm going to go with Prairie Pearl off of a Dodge Ram

Did you fabricate the piece that goes in the fan hole for the a/c lines, if not where did you get it.

It actually came with the vintage air direct fit kit.

looks great!! That Wegner front drive fits so good.

WOW from this derelict
http://i963.photobucket.com/albums/a...pswhqkfiki.jpg

to this beauty
DAYUM thats nice work man!

The car looks great, Im not sure if I should go vintage air or classic auto on my build, How was the install on the Vintage?

Thanks man!

So far the install has been really good haven't done any of the wiring for it yet but everything else has gone smooth. I ended up just getting the evaporator and the condenser kits separate and bought the vintage air ez clip line kit for all of the ac lines.

Its been awhile since I posted an update got a bunch of little things done before it went to paint. Got all of the spark plug wires made and tailored. Got the steam port lines bent up and also the pcv. Built the exhaust system ended up doing a full stainless system with an x pipe. It was a trick to get it up and over the axle with the Detroit Speed Quadralink, ended up going with a tanks inc 69 Camaro tank with the notched corners since they do not make one for a 70 Camaro yet, it actually fits good just need to modify the fuel neck a bit. Got the brakes from Tobin at Kore 3 ended up going with the z06 brakes. Also decided to go fuel injected instead of carbureted went with the FiTech efi can't wait to get the car back from paint to get everything on and see how that turns out. Also got the gauges from Speed Hut. The car went off to paint everything is getting final tuned should hopefully be getting color on the car in a couple of weeks. Also got the interior out to the interior guy so hopefully everything should come back around the time the car gets back from paint.

http://i963.photobucket.com/albums/a...ps3tmgrvg4.jpg

http://i963.photobucket.com/albums/a...pss43hqjkf.jpg

http://i963.photobucket.com/albums/a...psytbfozdb.jpg

http://i963.photobucket.com/albums/a...pscmrhtqsa.jpg

http://i963.photobucket.com/albums/a...psy5w0s0ga.jpg

http://i963.photobucket.com/albums/a...ps0hljcqky.jpg


http://i963.photobucket.com/albums/a...psehzrhxrg.jpg

http://i963.photobucket.com/albums/a...pse4mhnwuj.jpg

http://i963.photobucket.com/albums/a...pszjkvhqlo.jpg

http://i963.photobucket.com/albums/a...psomwioqwn.jpg

http://i963.photobucket.com/albums/a...psmrtreirh.jpg

http://i963.photobucket.com/albums/a...pswvt4znn9.jpg

http://i963.photobucket.com/albums/a...psxet4m2ie.jpg

http://i963.photobucket.com/albums/a...psi80sussu.jpg

Setup looks great! One question... Did you plumb a vacuum connection directly from the manifold vacuum port to the valley cover? If so, are you concerned about sucking oil directly into the intake? I have a catch can on mine, and I still pull some oil into the intake...

I can't fully see it, so perhaps I'm wrong, but I thought I would ask...

Looks really nice and I need to go out to the garage and get to work on my car.


Marty-mj
www.garagescene.net www.syborgtwinturbo.com www.2ndcamaro.com

The motor look beautiful! Nice job on the tail pipes. That edge on that door looks so crisp you could cut a finger on it!! Its' looking great, I can't wait to see it in color.

Very nice work!

Who's painting it for you?

Thanks guys!

Grand Collision in Hayward Ca

Did they do Nick's camaro?

Everything is looking great Bryan :thumbsup:

I'm pretty sure it was Grand.

Who is Bryan lol

Yeah Grand Collision is the one that did Nicks car.

The car is in first prime should get blocked then re primed blocked and then sealed then color should hopefully go on in the next couple of weeks.

http://i963.photobucket.com/albums/a...psbchhdisw.jpg

http://i963.photobucket.com/albums/a...ps5nbyuids.jpg

http://i963.photobucket.com/albums/a...psik0ehv4a.jpg

http://i963.photobucket.com/albums/a...pskeoedycb.jpg

Damned if I know :bitchslap: I realized I messed up as soon as I posted and then forgot to edit it Sorry

Went by the body shop today got another coat of primer on it they are going to block it again then spray sealer then color should be going on. Body guy said he hopes to have color on it maybe by the end of next week. :headspin:

http://i963.photobucket.com/albums/a...psa9judyww.jpg

http://i963.photobucket.com/albums/a...psgqterinr.jpg

http://i963.photobucket.com/albums/a...psdb48xijo.jpg

http://i963.photobucket.com/albums/a...ps00lanjce.jpg

http://i963.photobucket.com/albums/a...ps9rvo6bgd.jpg

http://i963.photobucket.com/albums/a...psdi6ltyma.jpg

http://i963.photobucket.com/albums/a...psm6ctwm3i.jpg

http://i963.photobucket.com/albums/a...pspkipj1h4.jpg

http://i963.photobucket.com/albums/a...pslltmy7bb.jpg

Nice progress!

Went by the body shop today and man it is looking killer. Should be getting color put on it next week can't wait to see how it looks. The gaps on everything is really nice and man is that thing straight.

http://i963.photobucket.com/albums/a...psefpglner.jpg

http://i963.photobucket.com/albums/a...psdudhkdrf.jpg

http://i963.photobucket.com/albums/a...pscefdy460.jpg

http://i963.photobucket.com/albums/a...psnuvngsvv.jpg

http://i963.photobucket.com/albums/a...pssqio5nak.jpg

Shes got color on her and man do I love that color it changes to different colors depending on the way you look at it and what light the car is in. Car should get color on it tomorrow morning then the hood and fenders should get it there after. Can't wait to get this thing back and get it assembled.

http://i963.photobucket.com/albums/a...psb7r4vbhv.jpg

http://i963.photobucket.com/albums/a...psb4u4twzq.jpg

http://i963.photobucket.com/albums/a...psli0wdxqr.jpg

http://i963.photobucket.com/albums/a...psr8vpb53h.jpg

http://i963.photobucket.com/albums/a...pskkp3nhyc.jpg

http://i963.photobucket.com/albums/a...psrbq6nu1t.jpg

http://i963.photobucket.com/albums/a...pshxytvcuc.jpg

Sweet!!

Nice Zac!!!! Gonna be a busy summer for you!!! If you don't have the glass covered, i can come by after work and give u a hand.....Cheers...

Damn that color looks good. I want to see what the rest of the car will look like.:thumbsup:

Thanks guys!

Thanks if I need a hand I will defiantly give you a call i got the glass coming from AMD.

With all the curves on a 2nd Gen this paint will look amazing.