Looks great! Have you figured out what you’re doing with your cold air intake/filter? Not a lot of space in the engine bay for it...


Sent from my iPhone using Tapatalk

Nice fab on the core support for the p/s reservoir.

Awesome build and thanks for all the ideas. Was wondering what steering column you have installed in your car?

Thanks Brian, I am working on a plan to route CAI to the left side. The hole I cut in the core support is going to provide a air intake. I am building a screen to cover the opening. I started with some aluminum angle 3/4 x 3/4 that iI ripped one side down to create a recess for the screen. I cut and welded the pieces together added the screen then capped it with 3/4” wide flat stock. Here are a few pictures that might make more sense.

Thanks 214Chevy.

1965NOVA, The column is a Ididit brand.

https://i.postimg.cc/Hs1Sc7FQ/3723-E...BC99-A3-DE.jpg

https://i.postimg.cc/RV1gcZz2/00-EEA...4-CA41-D80.jpg

https://i.postimg.cc/VkYD4Pfv/CBF029...5355-B5-EE.jpg

https://i.postimg.cc/kgfwpYGc/3-ECC7...0-A0-C8-FB.jpg

Looks great! That should work nicely!


Sent from my iPhone using Tapatalk

Been pulled away for a bit and haven’t had much time, I have the core support in primer and mocked up the overflow tank, PS tank, air intake screen and the lower radiator mounts. Still have the upper mount to complete.

https://i.postimg.cc/2yxDR8c3/30-F78...4-B1-CA036.jpg

https://i.postimg.cc/44vZhBfZ/8659-E...1-E822-E89.jpg

https://i.postimg.cc/wj49jM6m/4-A64-...-FEC4-A921.jpg

https://i.postimg.cc/qvvkrydr/D12532...CED3757-EF.jpg

https://i.postimg.cc/5N3xDpTp/8-E41-...9-D88191-A.jpg

I really like the air intake screen. That looks great. Good job!

Impressive work as always Mark!

Thanks Trey. It came out better than I thought it would.

Thanks Tom.

Built a aluminum hold down for the radiator. Trying out some dimple dies.

https://i.postimg.cc/3R5Stmtx/8-C7-C...972-F22945.jpg

Bracket for the accelerator pedal.

https://i.postimg.cc/26DGQm5q/A90-DF...-EBD5-EF56.jpg

https://i.postimg.cc/0yhcN7R0/07106-...2-A72-AF55.jpg

Then on to the fender supports.

https://i.postimg.cc/MHt9Z4qn/F212-F...1-D22-DC15.jpg

https://i.postimg.cc/bv2V03H5/E5-A69...DBD7-C14-C.jpg

https://i.postimg.cc/288H9z7h/E1-E19...E01-DE4-E7.jpg

https://i.postimg.cc/BZCYC8HJ/8-C1-E...43315-D794.jpg

https://i.postimg.cc/3JStPPt6/B1701-...AC6734-A73.jpg

Such a cool car.

The big brakes look so cool with the Weld wheels.

Nice fabrication going on here......

Shotgun panels..............OEMs use panels just this shape to brace firewall to wheelhouse. They provide impact attenuation and can be tuned for progressive crumple. Have to meet FMVSS crash test.
Practically every car worldwide uses them.

:patriot::patriot::patriot:

No more Korn bread!?

Fantastic work!

Nice work!

Love the detail in the fabwork.