[QUOTE=waynieZ;355995]Nothing back from Mike today.

Wayne, pick up that phone and give him a call, the way he has treated you is BULLSH!T. You really need to put on some pressure and get you baby home, you have been to nice and he is walking all over you.

Greg

Hi Greg Your right Nice guys Finnish last. but the end is finally in site. I just got an e mail from Mike, all the panels are done and he's got the bottom ready for final prime. He's going to prime it tomorrow and paint it Monday. Then he'll put the rear in it and panels back on. He's going to get in touch with me Monday to talk about maybe picking it up for the end of the week.

Ron Maybe I need to go hang with Weld for a while !

Hang in there Wayne. Its getting closer, it will be worth it in the end.:thumbsup:

Thanks Eric

Great to hear Wayne, I hope he really comes through with those upgrades he spoke of earlier, as he has been a WANKER in epic proportion.

Greg

What....
 

Guys... time to get real,,,, think what he dose to peouple... this is not good... get it out... remember what i told you..I had to get it out,, and lost a lot of monye on that deal... but it was a big relife in the end...( all the excus) on top of that,, we have to redo alott on my car...:(

Kjell
Norway....

PS.. I think it is more people out there that have the same ecspeariance...

Hang in there Wayne. I hope she comes home soon.

I talked to Mike today The spline on the axles was wrong and he needed to order the right ones. They will be in the beginning of the week. I got some pictures of some parts and of the work thats done to the body. Here are a few.
The first ones are of the sub with the brakes installed.

http://i172.photobucket.com/albums/w.../Z51Brakes.jpg

http://i172.photobucket.com/albums/w...Z51Brakes2.jpg

http://i172.photobucket.com/albums/w...esubframe1.jpg

http://i172.photobucket.com/albums/w...eSubframe2.jpg

The next ones are The fuel tank with the sump installed.

http://i172.photobucket.com/albums/w...motivesump.jpg
Aeromotive sump

http://i172.photobucket.com/albums/w...pinstalled.jpg

http://i172.photobucket.com/albums/w...s/return-1.jpg
return

http://i172.photobucket.com/albums/w...checkvalve.jpg
Breather with check valve

http://i172.photobucket.com/albums/w...dercoating.jpg
All Welded up ready for powder coating.

http://i172.photobucket.com/albums/w...llfinished.jpg
Finished tank.

Looks good Wayne I hope you get it back soon

x2 :thumbsup: