Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)
-   -   Dreamin Ta's (https://www.lateral-g.net/forums/showthread.php?t=48798)

Panteracer 03-07-2016 08:26 AM

Dreamin Ta's
 
1 Attachment(s)
I decided to do a tow hook while I have everything
open in front. Kind of like a Mean Streets copy but with more
offset since the Birds grille is different

Bob

Panteracer 03-29-2016 11:53 AM

Dreamin Ta's
 
1 Attachment(s)
Finally got the lights fitted up and the nose brackets
done. Need to add one more brace on the lower center
as things flex just a little too much

Bob

WSSix 03-29-2016 07:02 PM

Nice work, Bob. You'll have it back on the road soon!

Panteracer 03-29-2016 08:45 PM

Dreamin Ta's
 
Trey
I have been a liitle slow on things lately
Had the death cough cold for a couple of weeks
Then I did a little yard work

Now time to get the bird done
Been looking at brakes

Bob

Panteracer 03-31-2016 08:01 AM

Dreamin Ta's
 
1 Attachment(s)
Added one more vertical brace and a tie to the lower glass nose
as things were flexing slightly... I figured I needed the support for
the added piece I put on the spoiler

Bob

Panteracer 04-14-2016 03:09 PM

Dreamin Ta's
 
1 Attachment(s)
Almost done with one of the braces... cleaned up
the cut inner fenders... got myself into doing some
body work on them and finally said good enough.... its
a race car

Hope to drive it this weekend and see if anything moves
around before I try to fit the hood

Bob

Panteracer 04-17-2016 05:56 PM

Dreamin Ta's
 
1 Attachment(s)
Finally took the bird out for spin after playing
with Can Am cars yesterday. Good to get it back
on the road. Need to get the front sway bar mounts redone
then start on fitting the new glass hood. Several weeks
before running Crows Landing

Bob

Panteracer 05-02-2016 01:47 PM

Dreamin Ta's
 
1 Attachment(s)
I finally got to fixing the nutserts that were loose on the
front swaybar... fabricated some backing plates on both sides
and had to make access holes in the frame on the side where
the Power Steering is bolted thru

Attached is the fabrication starting

Bob

Panteracer 05-02-2016 01:52 PM

Dreaming Ta's
 
1 Attachment(s)
Finished backing plate for the passenger side
I then had to shim the sway bar to get the bind
out of it.. it took some time to get it right
Then I made some curved plates to keep the sway
bar from moving left and right.. I had this issue in
the past and hitting the frame with one side is not good

Might be a different car.. but I could not tell much on my test run

Getting ready to Autocross it so all that is left is the hood
but I could run without

Bob

glassman 05-02-2016 04:42 PM

Nice...:cheers:


All times are GMT -7. The time now is 12:49 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net