Lateral-g Forums
Page 32 of 71 « First 223031 32 333442 Last »
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)
-   -   My 69 Camaro, "Project Stance" (https://www.lateral-g.net/forums/showthread.php?t=24494)

Vegas69 08-01-2013 09:41 PM
May as well raise the trans tunnel while your at it......

DFRESH 08-01-2013 09:44 PM
Quote:
Originally Posted by 67zo6Camaro (Post 496826)
http://i1113.photobucket.com/albums/...psc88e8999.jpg

http://i1113.photobucket.com/albums/...ps6a028c87.jpg

A cut-off wheel did most of this interesting pattern. Looks like a little man. LOL. You can see that I made a cut out for the top of the rear end pumpkin and also 2 smaller slices down around the drive shaft tunnel. Those 2 slices allow for the wider section of the torque arm to clear the floor during suspension travel.
LOL--Greg W permanently etched into my build. Nicely done.

BW

67zo6Camaro 08-01-2013 10:07 PM
lateral-g

67zo6Camaro 08-01-2013 10:10 PM
lateral-g

67zo6Camaro 08-01-2013 10:23 PM
lateral-g

67zo6Camaro 08-01-2013 10:32 PM
lateral-g

67zo6Camaro 08-02-2013 10:19 AM
lateral-g

67zo6Camaro 08-02-2013 10:31 AM
lateral-g

DFRESH 08-02-2013 12:33 PM
My neighbors will miss the sound of my pipes dragging those long speed bumps i'm sure. It must be done though.

tones2SS 08-02-2013 04:59 PM
That's some serious fabrication going on. Keep up the good work.


All times are GMT -7. The time now is 09:33 PM.
Page 32 of 71 « First 223031 32 333442 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net