Lateral-g Forums
Page 32 of 54 « First 223031 32 333442 Last »
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)
-   -   Project ""Mercury Rising"" 1969 Camaro (https://www.lateral-g.net/forums/showthread.php?t=41460)

cjfirstgen 09-16-2020 06:21 AM
We decided on a final project name change with the addition of the Merc engine to "Mercury Rising" sorry for the confusion...the old name just wasn't going to work.

cjfirstgen 09-16-2020 06:25 AM
Heads to interior soon....preparing some of the pieces.

https://i.postimg.cc/2SqR36W5/IMG-6485.jpg

syborg tt 09-16-2020 08:40 AM
I am glad I am not the only one that went crazy with ARP hardware.

On a side note I had Totally Stainless make all of my custom bolts for Syborg and this latest version of 2nd Chance. So I feel your pain.

Quote:
Originally Posted by cjfirstgen (Post 706581)
I have ARP 12pt SS throughout the build but primarily throughout the DSE suspension and drivetrain. ARP only goes up to 1/2" so I sourced and contracted custom 17-4PH age hardened SS 12pt bolts to match tensile strength in 9/16" for the front and rear DSE suspension. I will never look at $50 bill the same again. And you need about 14 btw with a 6-8 wk lead time.

https://i.postimg.cc/VLZPYMdT/IMG-6514.jpg

https://i.postimg.cc/cLVq3S7B/IMG-6513.jpg

https://i.postimg.cc/ydy223ML/IMG-6512.jpg

cjfirstgen 09-16-2020 08:46 AM
Quote:
Originally Posted by syborg tt (Post 706591)
I am glad I am not the only one that went crazy with ARP hardware.

On a side note I had Totally Stainless make all of my custom bolts for Syborg and this latest version of 2nd Chance. So I feel your pain.
I tried to obtain from Totally Stainless but they told me their supplier was no longer able to provide the 9/16" bolts and they didn't know if they would ever carry them in the future and went further to say it was very unlikely they would offer them again.

WSSix 09-17-2020 06:43 PM
Mercury Rising is a good name.

That hockey stripe is fantastic against the red.

Musclerodz 09-17-2020 07:09 PM
Quote:
Originally Posted by cjfirstgen (Post 706594)
I tried to obtain from Totally Stainless but they told me their supplier was no longer able to provide the 9/16" bolts and they didn't know if they would ever carry them in the future and went further to say it was very unlikely they would offer them again.
Good and bad to know as I was just about to order some for a Camaro I am finishing up.

cjfirstgen 09-17-2020 07:53 PM
Quote:
Originally Posted by WSSix (Post 706642)
Mercury Rising is a good name.

That hockey stripe is fantastic against the red.
Thanks! Certainly fits the car better than what it was. Can't wait to get some better pics all cleaned up.

Quote:
Originally Posted by Musclerodz (Post 706645)
Good and bad to know as I was just about to order some for a Camaro I am finishing up.
About $700 and 6-7 weeks will fix that.:G-Dub:

cjfirstgen 10-04-2020 08:06 PM
Prepping for interior and finishing up some audio. While it is home with me I had to take a few pics. Still not final sanded in some spots or final buffed throughout. It is so straight and the paint just blows me away.

https://i.postimg.cc/2y23GLQJ/DSC-3250.jpg

https://i.postimg.cc/DZQSWM87/DSC-3214.jpg

https://i.postimg.cc/Pxfj43SX/DSC-3247.jpg

https://i.postimg.cc/sXCBgrfn/DSC-3218.jpg

https://i.postimg.cc/pL7h3jwM/IMG-6690.jpg

camcojb 10-04-2020 08:34 PM
Absolutely beautiful.

214Chevy 10-04-2020 10:00 PM
So classy and nasty at the same time...if that's possible.


All times are GMT -7. The time now is 03:28 AM.
Page 32 of 54 « First 223031 32 333442 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net