Good Morning All,

There is going to be two updates this week as i plan to work all day Saturday on the truck

Wanted to do something different for a steering Stop.
Dave came up with a pretty cool idea don't ya think.

http://www.syborgtwinturbo.com/album..._08_17_028.jpg

Just some Quick Picks of the Intercooler Piping

http://www.syborgtwinturbo.com/album..._08_17_030.jpg

All the Hose, V-Bands and Connections were supplied by Jim at:

www.hightempsilicone.com

He makes some really nice stuff and it's not the cheap stuff you find on Ebay.

http://www.syborgtwinturbo.com/album..._08_17_031.jpg

You can also see the Intercooler which was custom built by Gerhard at:
www.bellintercoolers.com

Turn around time was less then a week and the Quality is top notch

http://www.syborgtwinturbo.com/album..._08_17_032.jpg

Just another Quick Shot of all the Stainless Piping from:
www.stainlessworks.net

http://www.syborgtwinturbo.com/album..._08_17_033.jpg

Need to Create the Inner Fenders & Air Boxes this weekend

http://www.syborgtwinturbo.com/album..._08_17_034.jpg

Your not going to believe it i found an Upper Radiator Hose that Works
Now if i could just find a lower hose

http://www.syborgtwinturbo.com/album..._08_17_035.jpg

Just a quick shot of the Rear Suspension Stop.
I still need to pay Troy for this.

http://www.syborgtwinturbo.com/album..._08_17_036.jpg

That's all for today more to come over the weekend

Looking good Marty. Any idea how much longer before its drivable?

The second Tuesday of Next Week.

Actually my goal has been the Detroit Autorama in 07 and yes my fingers are really really crossed

Happy Saturday Night,

What started out as a very productive day didn't end so well.
Just remember Listen to the Voices in your Head they are there for a Reason!

Yep, found a Lower Radiator Hose that actual works.
It's hard to believe it actual follows the curves of the Frame.

http://www.syborgtwinturbo.com/album..._08_19_001.jpg

Installed the new Fiberglass Cladding.

http://www.syborgtwinturbo.com/album..._08_19_002.jpg

If you are thinking about adding really cool ground effects to your s10.
You need to contact Scott @ www.syclone-typhoon.com

http://www.syborgtwinturbo.com/album..._08_19_004.jpg

Yep missing the last piece of cladding this is where my day ended.
Seems I felt the necessary urge to run a 1/4" drill bit 1" deep into the pad of my left Hand.

http://www.syborgtwinturbo.com/album..._08_19_005.jpg

So my day ended early with a trip to the emergency room to make sure I
didn't have any metal in my hand and a tetanus shot just in case.

More to come later in the week once I can use my hand again.
And remember when the little voice tells you that you should move your hand - Listen!

Looking good. Bummer about the hand. Best of luck in the healing process!

Man i forgot how bad a tetnus shot feels for the next couple day's after.

Happy Wednesday Night.

Stop by the shop to play with some inner fender design and look at the air box.

http://www.syborgtwinturbo.com/album..._08_23_055.jpg

Hard to tell from the picture but we are going to draw air in from the the indicators.

http://www.syborgtwinturbo.com/album..._08_23_056.jpg

This gives you an idea of the arc were trying to fit acheive in the inner fenders

http://www.syborgtwinturbo.com/album..._08_23_051.jpg

Side View

http://www.syborgtwinturbo.com/album..._08_23_057.jpg

Looking for Opinions

http://www.syborgtwinturbo.com/album..._08_23_058.jpg

more to come this weekend
- and yes i am going to stay away from power tools this weekend

looks great marty , i like these inner fenders better , just cove them by the turbo .

Cool, looks amazing Marty. :thumbsup: