Hi Shane, just looked through your build thread from the beginning. Wow!
I have a couple questions that I hope you will help me with.
What kind of undercoating did you use? And how did you build the rear seat? Did you build off the factory metal frame or is it all foam? I need exactly what you have built for my 64 nova. I’m sure I can handle the foam shaping part but the rest I need a plan on lol Thanks! Chad.

I really like the look of that console.I'm not running one in my 69 but had been thinking about something along those lines.Yours looks great...nice work

Hey Chad, no problem, glad to answer any questions you have. The coating I used is the Upol Raptorliner. It’s bedliner and sprays on very nicely. If I recall correctly, I sprayed it at about 80 psi which gave me a very fine texture but you can experiment with lower pressures to get the texture you want. I did use the rear seat frame but it’s been modified for mini tub clearance and then I took the car to Shane Lisle at Sewn Tight Interiors in Louisville, KY and he worked his magic to make it match the front Recaros. Per my request, he removed the springs from the rear seat back to make it much thinner then it was originally since I’m running a roll bar and still wanted to have the ability to use the rear seat for my teenage boys. It actually sits quite comfortable but the legroom is severely limited so It doesn’t see much use. The 67 Nova I’m building wont have a roll bar in it for that reason, so it’ll be more of a “family car”!

Thank you, Dave! I had never run a console before in all the years I’ve owned the car but after getting it on the road and doing longer road trips, I started to appreciate the need for having some extra space to keep my junk!

Awesome Shane, thank you!

Missed your post, glad the measurements helped... this is the only cupholder setup I've found off the shelf for the console. Could easily be improved by putting hinges on it so it can be flipped up for easy access below:
https://www.camarocentral.com/1968_1..._p/con-886.htm

Sugar Shane,

didn't know you were on here! got to page 26 of you build, I'll have to finish later, awesome car, great design,

Hey Steve, too funny! You never know where I’ll turn up:cool: Glad you’re enjoying the thread and thanks for tuning in!

Correct me if I’m wrong that’s a DSE ac delete panel with a VA bulkhead ac connectors. How did you connect the lines from the evaporator to the bulk head?

Correct, I had to make custom lines from the evaporator to the bulkhead on the inside. It’s not easy but is time well spent if you wanna hide the lines as much as possible. You can make hardline patterns and send them to VA and they’ll custom bend and make the finished lines for you. The catch is that they’ll make them exactly how your template is so you wanna get it right.

Late to the party Shane but just saw your thread , great job on that install and thanks for the kind words.