Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)
-   -   Mali2ude final build for Power Tour 08 (https://www.lateral-g.net/forums/showthread.php?t=13736)

Boulder69 04-30-2008 07:50 AM

Jody,

Car looks great. Just last night I dug out the old PHRs with the Malitude builds just to remember what it was like before. You changed the few things I didn't really like about the first version, like color, wheels, and spindles. :thumbsup:

Speakin' of, could we get some pics of the front wheels with the Vintage Wheel Works, AFX spindles, and Touring Classics brakes? I have the spindles and brakes but really want to make sure the V40s will fit. Maybe an angle that shows the caliper clearance to the backside of the spokes? If you happen to know the wheel specs I would be interested in that as well even though I know what I need for my 1st gen. I think.

7TSS 04-30-2008 10:47 AM

Things seem to be moving along well. Keep up the great work. :thumbsup:

camcojb 04-30-2008 11:53 AM

Quote:

Originally Posted by kwhizz (Post 147400)
When it "Rolls" out of the trailer in Memphis :hail: with the Red Witch.........Ribs are on Charley.:thumbsup: ..........LOL

Ken

sounds great Ken!

Jody

67turbostang 04-30-2008 03:23 PM

Great job! This is the best looking Malibu I have ever seen! R u taking the car to the Good Guys show in the end of May?

camcojb 04-30-2008 03:39 PM

ok, moved the remote filter. Had to build a brace out of 3/16" strap to bolt to the edge of the inner fender to stiffen it up; mounted the filter on that brace and the lower fender brace, completely protected by the bumper when I get it installed.

http://www.camcojb.com/temp/malitude 599.jpg

http://www.camcojb.com/temp/malitude 600.jpg

camcojb 04-30-2008 03:40 PM

Quote:

Originally Posted by 67turbostang (Post 147459)
Great job! This is the best looking Malibu I have ever seen! R u taking the car to the Good Guys show in the end of May?

well, it should be on a truck heading to Power Tour the end of May.

Jody

camcojb 04-30-2008 04:35 PM

well, so much for my new oil filter location. Forgot about the bumper brace, runs right through where the filter is mounted. Back to looking again............ :rolleyes:

Jody

camcojb 04-30-2008 04:37 PM

Quote:

Originally Posted by Boulder69 (Post 147410)
Jody,

Car looks great. Just last night I dug out the old PHRs with the Malitude builds just to remember what it was like before. You changed the few things I didn't really like about the first version, like color, wheels, and spindles. :thumbsup:

Speakin' of, could we get some pics of the front wheels with the Vintage Wheel Works, AFX spindles, and Touring Classics brakes? I have the spindles and brakes but really want to make sure the V40s will fit. Maybe an angle that shows the caliper clearance to the backside of the spokes? If you happen to know the wheel specs I would be interested in that as well even though I know what I need for my 1st gen. I think.

theres about 3/8" clearance between the outside of the calipers and the wheel. About 1/8" between the front upper edge of the calipers and the face of the wheel. I think these are 4.75" b.s., but not positive.

Jody

camcojb 04-30-2008 07:09 PM

there's that big mouth look we all know and love.............. :D

http://www.camcojb.com/temp/malitude 603.jpg

http://www.camcojb.com/temp/malitude 604.jpg

http://www.camcojb.com/temp/malitude 606.jpg

zbugger 04-30-2008 08:13 PM

It looks incredible, Jody!! I really wish I lived closer. Not just so I could look at it, but so I could help you out as well. I may just have to make a special trip out there after power tour to check it out..... If you haven't sold it before that.:P


All times are GMT -7. The time now is 04:10 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net