Lateral-g Forums - JCG Restoration & Customs Customer Projects

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)

- - JCG Restoration & Customs Customer Projects (https://www.lateral-g.net/forums/showthread.php?t=30020)

We proofed the prototype today! ran the car for about 150 miles today.. The concept works.. I have been getting calls & PM's on this little item... I will make some more when we get back from SEMA but this time with -10 fittings..

http://i1015.photobucket.com/albums/...n/IMG_2779.jpg

http://i1015.photobucket.com/albums/...n/IMG_2778.jpg

Sorry.. I for got .. I will have 2 Mustangs that we will show up to @ LS Fest with.. 2007 & 1970 Fastback.. :D :unibrow: :lol: :D :rofl: :thumbsup:

Quote:

Originally Posted by Gonzo (Post 344245)

Here is another 68 Camaro we are working on here at the shop.. It has been a drag car all its life & now are working on putting back on the street.. When the car was stripped down to bare metal we found that it had lots of rust covered with bondo & card board was used as a backing to hold it in place.. Point of no return.. Owner said fix it & while you are @ it give it some custom touches.. Replacement floors were required with trunk & firewall..
Upgrade list: Scott Mock Sub-frame with C6 suspension, Rear suspension ??, LS2 with T56, Z06 Corvette wheels, & a few JCG custom pcs...

http://i1015.photobucket.com/albums/...n/P4300064.jpg

http://i1015.photobucket.com/albums/...n/P1010067.jpg

One of main body men who happens to be good @ replacement sheet metal, front sheet metal squaring, & gaping all opening.. wanted to be given the opportunity to do some custom fabrication work.. so since we have so much of it going on right now here @ the shop.. I said.. Go for it!! He wanted a bead roller.. We bought one.. & here are the results so far.. Not bad for his first time on the bead roller!

http://i1015.photobucket.com/albums/...n/IMG_1071.jpg

http://i1015.photobucket.com/albums/...n/IMG_1072.jpg

http://i1015.photobucket.com/albums/...n/IMG_1073.jpg

http://i1015.photobucket.com/albums/...n/IMG_1075.jpg

http://i1015.photobucket.com/albums/...n/IMG_1069.jpg

http://i1015.photobucket.com/albums/...n/IMG_1025.jpg

http://i1015.photobucket.com/albums/...n/IMG_1065.jpg

http://i1015.photobucket.com/albums/...n/IMG_1066.jpg

http://i1015.photobucket.com/albums/...n/IMG_1068.jpg

do you think you could make a few more of these transmission tunnel mods?

Quote:

Originally Posted by Gonzo (Post 443053)

Remember.. Greg owns a Ford Hot Rod with a Chevy engine!:D

Yep! And my Speed '33 is getting an LS3 480hp GM Crate!

Gotta love those Chevy motors!!! The others make good anchors.:woot:

''Gotta love those Chevy motors!!! The others make good anchors.''
:lol: :rofl: :lol: :rofl: :bow:

Quote:

Originally Posted by Gonzo (Post 442807)

Ok.. I can only keep this under wraps for so long... but I might as well let the cat out of the bag... Mast Motorsport 416 LS3 with a RPM Transmission Stage 5 Road race T56... Tonight we put in the 4.10 gears!

We did this LS conversion in 2 weeks... My crew was busting ass to get it done! We just felt that we would not have gotten the Ford motor rebuilt in time..

http://i1015.photobucket.com/albums/...ps84629285.jpg

This is a very sad day...:omg:

I have been asked several times to do this .. but currently just swamped with work that I cannot get around to doing.. Sorry..

Quote:

Originally Posted by randy (Post 443065)

do you think you could make a few more of these transmission tunnel mods?

JCG 70 Challenger

Just got this 70 Challenger in today.. We are going to do some very very bad things to it.. Hint! Yanking out the motor & transmission.. :D

http://i1015.photobucket.com/albums/...n/IMG_2979.jpg

http://i1015.photobucket.com/albums/...n/IMG_2978.jpg

Quote:

Originally Posted by DOOM (Post 443164)

This is a very sad day...:omg:

:wow: Just look at post # 358 it's going to get worse....:omg:

Yup! you should see the waiting list I have for doing LS conversions on Fords.. Why stop their? Might as well do a Mopar! :D

Quote:

Originally Posted by FETorino (Post 453004)

:wow: Just look at post # 358 it's going to get worse....:omg: