Nooooooooooooooooo!!!!!!!!

Better to get it right then to rush it.

Sorry to hear that Al, but 'in the Universe' doesn't come quick or cheap in today's world. SEMA and your followers will wait and enjoy it just as much when the time comes. You and the boys keep up the good work!

:cheers:

x2 well said, Ron.

How about just wrapping the car this year?

Bummer on the Sema thing and wrapping the car is not a bad idea since you plan to race it. It will actually protect the car to some degree.

I agree...wrap it and create the buzz at sema....then see where things go

Thanks guys for the words of encouragement! We looked into wrapping but it last year as a possible solution but the car still needed to be painted as the wrap will show if there areas the are primered. It will even show the orange peel through the wrap.

Wow, its been a while since I have updated this thread. Progress a little slow since the boys started back up in college. Hoping to get her done when they take the summer off.

They redid the shock tower. First time the skimmed the seam

http://i1231.photobucket.com/albums/...ps67f4c3c3.jpg

With the concern for cracking under stress, the seams were cleaned and stitch welded and finally reskimming the smooth.

http://i1231.photobucket.com/albums/...psb31265e5.jpg




The trans and diff cooler brackets had compound bends which required a finger bender. We couldn't find one anywhere. I buddies at Derale came to the rescue and pulled it off.

http://i1231.photobucket.com/albums/...psfdf891d1.jpg

Package was cut out and a smaller one fab in it place.

http://i1231.photobucket.com/albums/...ps4bbb8c86.jpg

Every component in the engine bay was vapor blasted. This machine is about $30,000 but leave a finish that very fine.

http://i1231.photobucket.com/albums/...ps9fbb8e21.jpg

http://i1231.photobucket.com/albums/...ps1a4e6f26.png

http://i1231.photobucket.com/albums/...ps21a19f07.png

http://i1231.photobucket.com/albums/...ps1a9a8b0e.png

ABS has been relocated and lines completed.

http://i1231.photobucket.com/albums/...ps516ac5b0.jpg

Camber/Caster plate Justin design and had built are done. Top plate is bead blasted and electrolux nickel plated. Very proud os him doing these.

http://i1231.photobucket.com/albums/...ps3f35f54d.jpg

Rear shock hats completed.

http://i1231.photobucket.com/albums/...ps40e68f89.jpg

Most all the CF parts are in.

Doors will drop about 90 lbs.

http://i1231.photobucket.com/albums/...ps36156173.jpg

We had these parts made for G5.R in dry carbon. Roof, hood and trunk will drop approx 40 plus lbs.


http://i1231.photobucket.com/albums/...ps8928bc19.jpg

Since it wont have any headliner, you will see the weave when sitting in the car. Kinda cool.


http://i1231.photobucket.com/albums/...ps1897d91f.jpg


Here are some studio shots they took.

http://i1231.photobucket.com/albums/...ps3c48e167.jpg

Dry carbon hood


http://i1231.photobucket.com/albums/...ps582557ef.jpg


http://i1231.photobucket.com/albums/...psbfaa9cc7.jpg

Hood vent


http://i1231.photobucket.com/albums/...ps77a0a0e4.jpg

Dry carbon trunk


http://i1231.photobucket.com/albums/...psd0e1673d.jpg

Lower grille


http://i1231.photobucket.com/albums/...ps7677ba0d.jpg


http://i1231.photobucket.com/albums/...ps904f2cc9.jpg

Z/28 rear diffuser


http://i1231.photobucket.com/albums/...psc7b17990.jpg

trunk filler panels


http://i1231.photobucket.com/albums/...ps3e267bf2.jpg

Z/28 spoiler


http://i1231.photobucket.com/albums/...psca260a72.jpg


The factory powder coating was removed on the wicker bill. It was then brushed and anodized. Has a very nice contrast against the CF spoiler.

http://i1231.photobucket.com/albums/...psbdbd3685.jpg

wow, looking good al.


Who is doing the CF work?