Fixed the squeek from my front drive today. It was a combination of a bad bracket and a very dry belt. :woot:

She's running good now.

Also, found a radiator cap worthy of our cars.. nice but not all polished and flashy. It's from Billet Specialties and was about $20.

http://picsorban.com/upload/gas cap pen.jpg

Someone asked me about my fire extinguisher mount. It's just plate alum I had cut to a template at my water jetter. I then drilled the holes, rounded the edges and scuffed it up with a scotchbrite pad. After that I attached the plate for the Safecraft extinguisher. Oh, the "tongue" is offset one inch and was bent down towards the floor just a bit. The extinguisher in this location doesn't interfear with the passenger at all.

http://picsorban.com/upload/mount pen.jpg

Lastly, I had a request for a pic of how my proportioning valve is mounted. Here it is. it's hung off a bracket that is attached to the master and the clutch master hangs off it as well. Makes for one tidy package.

http://picsorban.com/upload/brake pen.jpg

Steve i love ur car man
you did an awsome job on it everything seems to work congrats
well be seeing some vids soon?