Lateral-g Forums - 1968 Camaro "Badmotorfinger" v2.2

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)

- - 1968 Camaro "Badmotorfinger" v2.2 (https://www.lateral-g.net/forums/showthread.php?t=28515)

Lookin good guys! I like the exhaust:thumbsup:

Quote:

Originally Posted by Vince@MSperfab (Post 547318)

i'd mount that little bad boy behind the glove box.

Ignition is planned to go in there. It's small but still 21 lbs. Low and center of car is never a bad place to put things. :)

Quote:

Originally Posted by 57hemicuda (Post 547331)

I don't know that I have ever said this before, but your oil lines are hitting your rear window crank. LOL

http://i1113.photobucket.com/albums/...ps104f756f.jpg

You have a sharp eye there Ron. Gotta leave those cranks so little Johnny can sit on the little battery when he is old enough and roll down the windows for some airflow. It's gotta get somewhat hot in that back seat.

Quote:

Originally Posted by GregWeld (Post 547338)

I'm really glad to see how much weight is being added to this "street" car.... I was a little worried the SB2 might give him a P:W ratio that might make it faster than the Mustang..... Obviously my worries were overblown.

Mustang = race car
Camaro = street car

:D

Quote:

Originally Posted by Flash68 (Post 547386)

Mustang = race car
Camaro = street car

:D

:lmao:

Quote:

Originally Posted by Flash68 (Post 547305)

This looks absolutely killer. It's a shame it won't be visible very often.

http://i236.photobucket.com/albums/f...psa1fe8bd0.jpg

Is there any issue with exhaust flow in using a pipe like this or a full rectangle vs oval or round? I like the idea, especially after trying to run my exhaust this week. It's almost impossible to get that stuff tucked up.

Quote:

Originally Posted by califconstruct (Post 547360)

Very Impressive. Definitely thinking outside the box!
You really took this build to a whole different level!
Way to go for it Dave!:thumbsup:

^^I agree.
What a build.

diggin' the progress! Like others have noted and you have dealt with, I am doing a lot of :headscratch: trying to figure out how I am going to tuck exhaust into my car.

Quote:

Originally Posted by 67zo6Camaro (Post 548220)

It was nice seeing Dave this past weekend. We did the usual puch list items and went over a few things to fine tune the game plan. The Butler seat came in and that was the main reason for the visit. We spent some time together mocking up the seat, APRacing pedal assembly and the Woodward steering column to his liking. Looks like everything is going to fit with a little modification pushing the pedal assembly forward about 1/2 inch into the firewall and pushing the seat back a few inches.

After our work was done, we gave BadMotorFinger a treat and let her purr outside in the sun for a bit. A good time for some "On the ground" photos. No humans were hurt or bitten during our photo session.

http://i1113.photobucket.com/albums/...ps8453667f.jpg

http://i1113.photobucket.com/albums/...psb5c3f68f.jpg

http://i1113.photobucket.com/albums/...ps8a8d8b3c.jpg

http://i1113.photobucket.com/albums/...ps61f4e38e.jpg

http://i1113.photobucket.com/albums/...psdc22bcbe.jpg

looking ready to battle it out.

You need to send that baby to the east coast, I have some "Big American Bulges" in mind for that car that would be wicked. Looks awesome Dave.

BMF is now nice and...

:D