Happy Monday Morning.

Big Updates this week looks like I am going to split this update into multiple e-mails.

Starting with the bed.
The rear belly pan is almost complete.

http://www.syborgtwinturbo.com/album..._10_07_014.jpg

2nd shot - show's off the air ride tank and hardware

http://www.syborgtwinturbo.com/album..._10_07_016.jpg

Side View

http://www.syborgtwinturbo.com/album..._10_07_017.jpg

This is what the back side of the wheel well looks like.

http://www.syborgtwinturbo.com/album..._10_07_018.jpg

Looking back from the inside of the wheel well

http://www.syborgtwinturbo.com/album..._10_07_019.jpg

This is what we are planning to do the front of the wheel well.

http://www.syborgtwinturbo.com/album..._10_07_022.jpg

This is what it would look like if we didn't modify it.

http://www.syborgtwinturbo.com/album..._10_07_027.jpg

Dave finally trimmed the inner fender to expose the frame.

http://www.syborgtwinturbo.com/album..._10_07_024.jpg

More to come in another e-mail.

Okay like I said Dave accomplished a bunch of work this week.

Air goes in the driving light.

http://www.syborgtwinturbo.com/album..._10_07_005.jpg

Curves up to the Airbox.

http://www.syborgtwinturbo.com/album..._10_07_006.jpg

Here is where it meets the Airbox.

http://www.syborgtwinturbo.com/album..._10_07_007.jpg

Yet another little detail that needs to addressed

http://www.syborgtwinturbo.com/album..._10_07_013.jpg

Where going to extend the inner fender to cover the mounting hardware for the GT's Cladding.

http://www.syborgtwinturbo.com/album..._10_07_012.jpg

While were at the front of the truck.
We finally found a suitable location for the overflow bottle behind the core support.
Yep it's a scary home but it works.

http://www.syborgtwinturbo.com/album..._10_07_028.jpg

Yep it's tight in there but we can still view the tank from above.

http://www.syborgtwinturbo.com/album..._10_07_029.jpg

one more post and i'm going to bed

Okay like I said Dave did a bunch this week.

However i actually did this update.

First I want to Thank Caleb Davis for locating a Supplier on a Saturday
that would have a smooth tailgate in stock and willing to wait for me to pick it up.

http://www.syborgtwinturbo.com/album..._10_07_032.jpg

Okay time to cut it up and install the handle relocate kit from LMC Truck.
PS - man is this a nice kit.

http://www.syborgtwinturbo.com/album..._10_07_034.jpg

Back View

http://www.syborgtwinturbo.com/album..._10_07_035.jpg

First Cut the Opening.

http://www.syborgtwinturbo.com/album..._10_07_041.jpg

Next Drill 14 holes without drilling into your hand.
Mount relocated handle.

http://www.syborgtwinturbo.com/album..._10_07_042.jpg

Really that's it for this week.

How much bigger are the belltechs vs the zq8 sway bars? Would I see much improvement over the zq8? Also my truck is dropped 5/6.

couldn't tell you for sure. I can measure mine and see if you can find a zq8 truck. I know that some of the guy's on S-Series have swapped out for the bell techs.

Can you please measure them for me? thanks!!!

Very nice!!! as always. I couldn't find the thread in the usual forum and I was like :willy:

yep it was moved last week. Just trying to keep everyone on there toes